| Post Name | ASSISTANT CRANE DRIVER ELECTRICAL |
|---|---|
| Department | PORT |
| Question Paper Code | 034/2018/OL |
| Category Code | 201/2016 |
| Date of Test | 19 June 2018 |
| Medium of Question | ENGLISH |
| Exam Type | Online Examination |
| Total Questions | 100 |
1
The Schedule of Constitution which the list of recognized languages
Answer
B. Eighth
2
Which Article deals with the Fundamental Rights to Constitutional Remedies ?
Answer
B. Article 32
3
The provisions regarding Emergency has been adopted from
Answer
A. Germany
4
Who administers the Oath of office to the President of India ?
Answer
A. Chief Justice
5
The Right to Education was added as a Fundamental Right by which amendment?
Answer
A. 86th
6
The first Malayalam printing press in Kerala was established at
Answer
C. Kottayam
7
Sadhu Jana Paripalana Yoggam was established by
Answer
C. Ayyankali
8
The agitation which was conducted to protest against the Constitutional Reforms of 1932
Answer
D. Abstention Movement
9
The Diwan who was criticized by Swadesabhimani Ramakrishna Pillai ?
Answer
D. P. Rajagopalachari
10
The book 1114 nte katha deals with the life history of
Answer
A. Akkamma Cherian
11
The destination of Pattini Jatha
Answer
B. Kannur-Chennai
12
The famous freedom fighter of Kerala who was the grandson of the Raja of Palghat ?
Answer
D. K. P. Kesava Menon
13
Kumaran Asan's poem Veenapoovu was first published in
Answer
D. Mithavadi
14
The novel Enippadikal was written by
Answer
A. Thakazhi Sivasankara Pillai
15
Who among the following has not received Jnanapeedam ?
Answer
B. Vaikom Muhammed Basheer
16
The first Asian to receive the Hoover Medal
Answer
D. A.P.J. Abdul Kalam
17
Nicolas Maduro became the President of
Answer
C. Venezuela
18
The popular name for Chola Lake
Answer
B. Bay of Bengal
19
Burning candle wrapped in barbed wire is the logo of
Answer
C. Amnesty International
20
Dr. Ruth Shah died recently at
Answer
C. Karachy
21
Setting of the saw
Answer
D. all of the above
22
Universal surface gauges are used for
Answer
D. all of the above
23
Centre head of a combination set is used for
Answer
C. locating the centre of a cylindrical job
24
Flutes or spiral grooves are used in drill are
Answer
C. both A and B
25
_______ is the distance a drill advances in to the work in one complete rotation.
Answer
A. feed
26
_______ are to use the check the internal and external radius of work piece.
Answer
B. radius gauge
27
What is the use of the cutting fluids or coolants ?
Answer
D. all of the above
28
Chisels are made of
Answer
B. high carbon steel
29
least count of a micrometer is
Answer
A. 0.01 mm
30
_______ is a precision instrument meant for measuring angle precisely to an accuracy of 5 minutes.
Answer
A. vernier bevel protractor
31
_____ is an operation of beveling the end of the drilled hole.
Answer
A. countersinking
32
ISO metric thread is designated as M12 × 1.25. What is 1.25 ?
Answer
C. pitch of the thread
33
When two machined components are assembled a small gap is needed between two parts is called
Answer
Question Cancelled
34
_______ is the difference between the maximum limit of size and minimum limit of height.
Answer
D. tolerance
35
Least count of a vernier micrometer is
Answer
C. 0.001 mm
36
Cast iron is manufactured from
Answer
B. cupola furnace
37
The purpose of annealing are
Answer
Question Cancelled
38
Zinc coated iron is called
Answer
D. galvanized iron
39
______ flame is used to weld most of the common metals, in oxyacetylene gas welding.
Answer
A. neutral flame
40
Which metals have highest melting point ?
Answer
D. tungsten
41
Lathe bed is made of
Answer
B. cast iron
42
Cutting tool material following qualities
Answer
D. all of the above
43
A fit which may sometimes provide clearance, sometimes
Answer
B. transition fit
44
_______ is a precision instrument for checking and setting of angles.
Answer
C. sine bar
45
_______ is a precision finishing operation carried out using fine abrasive materials.
Answer
D. lapping
46
_____ when added to steel improve corrosion resistance, toughness and hardness of steel.
Answer
A. chromium
47
A special device which holds, supports, locates and also guide the cutting tool during operation is called
Answer
B. jig
48
Riveting is a method of making ______ joints.
Answer
B. permanent
49
Brass is an alloy of
Answer
C. copper and zinc
50
Purpose of using lubrication
Answer
C. both A and B
51
The temperature at which the oil catches fire and continues to be in flame is called
Answer
B. fire point
52
Machining processes that involve the removal of material in the form of chips can be called
Answer
A. conventional machining process
53
Purpose of machine foundation
Answer
D. all of the above
54
10 machinists completed a work in 9 days. How long will it take for 15 machinists to do the same work ?
Answer
B. 6 days
55
The square root of 0.04 is
Answer
A. 0.2
56
The cutting speed is expressed in
Answer
D. meter/min
57
The conic section obtained by cutting plane parallel to the axis of cone is
Answer
C. Hyperbola
58
The rate of change of displacement of a body is called
Answer
B. velocity
59
In a power transmission system rotary motion is converted in to linear motion or vice versa
Answer
A. rack and pinion
60
System International (S.I.) unit of force is
Answer
B. newton
61
The working of a bench vice is based upon
Answer
A. Screw thread
62
The least count of a vernier caliper is
Answer
A. 0.02 mm
63
Which among the following is an artificial abrassive ?
Answer
D. Aluminium oxide
64
Drill sleeve is used when the taper shank of the drill is
Answer
B. Smallar than machine spindle
65
Name the suitable cutting fluid for drilling mild steel plats.
Answer
C. Soluble oil
66
The filler metal, solder used in soldering is an alloy of
Answer
D. Lead and tin
67
In a single cut file, the teeth are cut on the file face at angle of _______ of the centre line of file.
Answer
C. 60°
68
For grinding carbide materials, the suitable grinding wheel is
Answer
B. Diamond
69
The material of twist drill is
Answer
B. H.S.S.
70
Give reason for cutting fluid used in cutting operation
Answer
D. All the above
71
The main parts of Try square is
Answer
A. Stock or beam and blade
72
The distance between one point of a screw thread to the corresponding point on the next thread is called
Answer
C. Pitch
73
Which one of the following is not a ferrous metal ?
Answer
A. Bronze
74
The material used to make a flat file
Answer
B. High grade steel
75
In ________ cutting, more than one cutting edge came into action.
Answer
C. Oblique
76
Name the device which hold and locates a work piece and guides and control one or more cutting tool.
Answer
D. Jig
77
Name the tool used to check the alignment of a machine, while erecting the machine in foundation bolt in the concrete base.
Answer
C. Spirit level
78
The purpose of flute given in a twist drill is
Answer
C. Both A and B
79
In lathe turning operation, cuutting speed is expressed in
Answer
D. Metres per minute
80
To make up a long length, several pieces of shafts are joined together with the help of
Answer
A. Coupling
81
Hand taps are usually made as sets of
Answer
B. Three
82
The grinding or abrading process mostly for finishing holes by means of bounded abrasive stones, known as
Answer
B. Honing
83
For connecting two shafts of axes of which intersect, the mechanism used is
Answer
D. Bevel gear
84
For making purpose, round workpieces are placed on
Answer
A. V-block
85
A combination set has three moving heads 1. Square head 2. Centre head. Name the third one
Answer
D. Protractor head
86
Name the tool used to remove a drill from drilling machine spindle.
Answer
B. Drift
87
Name the process, in which simple shaped components can be made very accurately, clean, without waste and suitable for producing refractory metals and nonferrous metals.
Answer
B. Powder metallurgy
88
An operation involving heating and cooling of metals or alloys in the solid state to produce desired properties is called
Answer
D. Heat treatment
89
The latin word ferrum denotes
Answer
A. Iron
90
In an outside micrometer, the object to be measured is held between
Answer
A. Spindle and anvil
91
Mention the machine, from the hint, tool feeds against a rottating work.
Answer
C. Lathe
92
Point out the special feature of non-ferrous metals.
Answer
Question Cancelled
93
The vice suitable for holding and heavy hammering in the work is
Answer
B. Leg vice
94
The hammers are generally made out of
Answer
C. Forged steel
95
Find the odd one, which is not related to file ?
Answer
A. Spindle
96
Name the welding process depends upon electricity
Answer
D. Arc welding
97
Generally the point of centre punch has an angle of
Answer
C. 60° - 90°
98
External thread can be cut on a round bar, with the help of
Answer
C. Lathe or die
99
For providing relative movement between the parts, the hole diameter being larger than the shaft diameter. This difference is called
Answer
B. Clearence
100
Name the commonly used fuel gas is a gas welding process
Answer
A. Acetylene
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.