| Post Name | Computer Grade II - Printing |
|---|---|
| Question Paper Code | 151/2023/OL |
| Category Code | 718/2022 |
| Date of Test | 2 December 2023 |
| Exam Type | Online Examination |
| Total Questions | 100 |
1
The formula to calculate the price of a printed product is
Answer
B. Price = Cost + Profit
2
_________ is the technique of assessing the sale price of a printed job.
Answer
C. Estimating
3
__________ is done after the job is completed and delivered to the customer.
Answer
A. Costing
4
________ is a fixed cost.
Answer
D. Rent
5
The formula to calculate the unit cost of a printed book
Answer
A. Unit Cost = (Total Fixed cost + Total Variable Cost)/No. of copies produced
6
________ is an overhead expenses
Answer
D. Office supplies
7
To calculate the quantity of paper required for producing a job in a particular size, the formula is
Answer
B. Paper (reams) = (No. of Pages per copy x No. of copies to be produced)/Section x 500
8
The substance of paper (GSM), the area of one sheet (A), the no. of sheets (N). The formula to calculate the weight of sheets (W) required for the job
Answer
A. W = (GSM x A x N)/1000
9
The substance of paper (GSM), the width of the reel (B), the total length of paper wrapped in a reel (L). The weight of the reel (W) is calculated by
Answer
D. W = (GSM x B x L) x 1000
10
The formula to calculate the ink consumption for a print job
Answer
A. ( ) / 355
11
Paste area of book in (A), No. of books (N), Coverage power of paste per kg in (P). The page required in Kg for the job is calculated by
Answer
B. (A x N)/P
12
Actual expenses incurred in a particular job is called as
Answer
A. Cost
13
The formula to calculate the quantity of covering material required for job
Answer
D. (No. of book covers x Length of covering material roll) / No. of covers obtained from the roll
14
The formula to calculate the quantity of stitching wire required for a job
Answer
C. (no. of books x no of stitches per book x length of wire (mm) per stitch) / (length of wire (m) in the coil of given gauge x 1000)
15
The cost that remains constant regardless of the number of publications produced
Answer
A. Fixed cost
16
The crown size of the paper is
Answer
B. 15 x 20 inches
17
________ is a variable cost.
Answer
Question Cancelled
18
The 'K' in the formula to calculate the ink consumption for a print job denotes
Answer
B. Kind of forme
19
The choice for the size of paper to be used is made by the printer is based on
Answer
B. Size of the machine
20
Works costs is calculated by
Answer
A. Prime cost + Factory expenses
21
List out the functions carried out in pre-press department
Answer
C. Prepare editorial and build page layout
22
Print control strips and densitometer are widely used in modern printing press as
Answer
A. Quality control devices
23
The skill required for purchasing manager are
Answer
Question Cancelled
24
Production Scheduling is done by
Answer
A. The Production Planner
25
Personal protective equipments (PPE) used in printing industry to protect from
Answer
B. Injuries and work related hazards
26
Find out from the following the raw material used for making paper
Answer
Question Cancelled
27
G.S.M. the word stands for
Answer
A. Weight of paper
28
Optical properties of paper can be helpful in
Answer
C. Total print quality
29
The property of paper by which a printer can create accurate high quality printed images?
Answer
A. Printability properties of paper
30
________ is the unique ink drying method that could dry wet ink to solid in record time.
Answer
B. Radiation curing
31
Name the paper that help to print protected documents with a high degree of document protection to prevent fraudulent use.
Answer
C. Security paper
32
The two factors that directly affect the drying time of printed products are
Answer
A. Viscosity and pH
33
Thixotrophy can be defined as
Answer
D. Tendency of an ink to flow more freely after being agitated by rollers
34
Why is printer's ink expensive?
Answer
Question Cancelled
35
The major two factors that determine the tensile strength of paper are
Answer
C. The strength and bonding of fibres and direction of fibre.
36
Choose an image file from the following
Answer
B. PNG
37
What is SVG?
Answer
A. Scalable Vector Graphics
38
The process of dividing the image in to two or more colours is called
Answer
D. Colour Separation
39
Identify an imposition method from the following
Answer
C. n-up
40
Name the work that an editor does to improve the formatting style and colour of a manuscript
Answer
A. Copy editing
41
Identify the term which is most related with pre press?
Answer
C. Preflighting
42
________ is a practice used to eliminate misregistration by overlaping adjacent colours or expand the pixels.
Answer
B. Trapping
43
LAB is a colour space stands for
Answer
A. Lightness, Channel A and Channel B
44
Overlaping of screen dots in an image is called
Answer
C. Moire
45
Choose a software used for Vector graphics
Answer
B. Corel Draw
46
The fundamental characteristics of colours are
Answer
D. Hue, Saturation, Brightness
47
Smallest element of a digital image is known as
Answer
D. pixel
48
Which type of imposition method is applicable for printing both sides of paper using the same plate?
Answer
B. Half sheet work
49
Page Layout design is also called as
Answer
A. Page Composition
50
Select the terms related to the principles of design
Answer
C. Harmony and Unity
51
Any element of design has a visual weight which need to be distributed evenly in your design. What is the name this design function?
Answer
C. Balance
52
The inside of a narrow angle where two strokes in a character meet, as in V, W, Y
Answer
A. Crotch
53
Level of intensity of colors is called?
Answer
D. Saturation
54
The process used by image software to fill in missing information (based on the surrounding pixels) when an image is up sized or manipulated?
Answer
D. Interpolation
55
Identify the type of zoom that achieves magnification by electronically spacing out pixels?
Answer
A. Digital zoom
56
The smallest unit of a raster graphic. Derived from the words "Picture Element".
Answer
B. Pixel
57
What is the other name of thermal inkjet printing?
Answer
C. Bubble jet
58
Name the unit that is used for measuring resolution of halftone screening?
Answer
D. Lpi
59
Identify the format which is device and resolution independent?
Answer
C. Pdf
60
The curved or tapered end of a stroke that has no serif.
Answer
B. Finial
61
For a perfect offset printing process identify the property essential for the influence of inking rollers.
Answer
A. Viscoelastic properties
62
In which dampening system, the dampening solution is catapulted onto the printing plate as finely dispersed droplets.
Answer
Question Cancelled
63
Identify the type of feeder which overlaps the sheet in forwarding board.
Answer
B. Stream feeder
64
Which type detectors are placed in feeder board?
Answer
D. Double sheet detector
65
_______ blanket is squeezed in the nip bulges out on either one or both sides of the nip.
Answer
B. Conventional
66
The registering device that situated at the gripper edge of the feed board is called
Answer
A. Front lay
67
The distance between the bearer height and the cylinder surface is called
Answer
C. Undercut
68
Which cylinder in printing unit does not have bearers?
Answer
C. Impression cylinder
69
Which of the following statement is TRUE for multi roller inking system? (i) To grind and transfer the ink evenly (ii) It ensure the breakdown of ink strip received from the duct (iii) Plate roller receives an equal supply of fresh ink (iv) Number of contact points between rollers to produce milling action
Answer
D. (i), (ii), (iii), (iv)
70
The time gap taken by the ductor roller to transfer the ink or dampening solution.
Answer
A. Dwell time
71
Calculate the body setting of plate and blanket cylinder with bearer clearance if Plate recess = 0.5 mm, Blanket recess = 2.13 mm, Bearer clearance = 0.076 mm
Answer
A. 2.706 mm
72
Which type of reel stand is used for faster changeovers while the machine is in running condition?
Answer
C. Revolving reel stand
73
The series of collapsible rollers present in web offset machine to store the web during splicing operation is called
Answer
D. Festoon
74
The joining of tail end of expiring reel to the beginning of new reel is
Answer
B. Splicing
75
The web steering device which is located in the infeed section to control the placement of images from side to side on the web.
Answer
C. Box tilt
76
Which is set to project on the underside of the web to reduce the difference in RPW?
Answer
B. Bustle wheel
77
After drying, the web exits with a surface temperature of about
Answer
D. 130°C
78
What is RTF?
Answer
A. Roller top of former
79
Which fold is make across the width of the signature at right angles to the former fold?
Answer
B. Jaw fold
80
The auxiliary equipment found on presses running jobs where a small amount of copy is going to vary during the run.
Answer
C. Imprinters
81
_______ causes the image transfer to take place because it forces the ink through the stencil and the fabric openings onto the receiver.
Answer
B. Squeegee
82
In ballard skin method, the onetime use of engraving copper layer is of approximately
Answer
Question Cancelled
83
Which roller has a cellular surface in flexographic inking system?
Answer
C. Anilox roller
84
The invisible line that passes through the center of the length of the cylinder is
Answer
B. Axis
85
______ refers to number of rows of cells per linear inch.
Answer
A. Cell count
86
GATF Digital plate control Target is very useful for
Answer
Question Cancelled
87
Halftone wedge consist of ______ panels.
Answer
B. 9
88
UGRA plate control wedge consist of
Answer
Question Cancelled
89
Section 10 of copyright Act
Answer
B. The Central Govt. Shall appoint a Registrar of Copy rights
90
FOGRA
Answer
D. Graphic Technology Research Association
91
Binding has been classified according to the
Answer
B. Use of the product and the types of binding
92
The method that uses an adhesive to hold sheets on signatures together and to fasten the flexible cloth on paper cover on to the body is known as
Answer
C. Case binding
93
The cover of the book becomes more durable due to
Answer
A. End papers
94
A plastic on wooden piece located directly below the cutting blade beneath the table to protect the blade is known as
Answer
C. Cutting Stick
95
Which of the following does not include Thread sewing?
Answer
A. Saddle stitching
96
Which term refers to making three sides of a book even and square?
Answer
A. Trimming
97
_______ is the general term associated with the assembling of signatures.
Answer
C. Binding
98
If an image is sunk in to substrate, rather than being raised, the process is called
Answer
D. Debossing
99
______ marks can be used on signatures to check the accuracy of the signature gathering sequence.
Answer
A. Collating
100
The processes that create a three-dimensional raised image on a substrate by pressing it between two dies is called
Answer
B. Embossing
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.