| Post Name | DEMONSTRATOR IN TOOL & DIE ENGINEERING |
|---|---|
| Department | TECHNICAL EDUCATION |
| Question Paper Code | 093/2014 |
| Date of Test | 3 July 2014 |
| Medium of Question | ENGLISH |
| Exam Type | OMR Examination |
| Total Questions | 72 |
1
The mars mission of NASA is known as
Answer
D. Quriosity
2
The constitutional amendment in India which made ‘Right to education’ a Fundamental right
Answer
C. 86
3
Who among the following was the president of the Guruvayur Satyagraha Samithi which led the Guruvayur Satyagraha of 1931?
Answer
D. Mannath Padmanabhan
4
Ronjan Sodhi who received Rajiv Gandhi Khel Ratna Award for 2012-13 is associated with which of the following games
Answer
A. Shooting
5
Which of the following companies was given the title Maharatna by Government of India in 2013?
Answer
B. BHEL
6
Doldrums are
Answer
B. Equatorial zone with low pressure
7
Which of the following countries hoists the World Cup Hockey tournament in 20 14?
Answer
C. Netherland
8
Which of the following vitamins is built in human body?
Answer
A. Vitamin D
9
Bhagat singh was hanged in association with which of the following cases?
Answer
A. Lahore conspiracy case
10
The first news paper in Malayalam language ‘Rajyasamacharam’ was brought out by
Answer
C. Herman Gundert
11
Which among the following was not an internet search engine?
Answer
B. BARK
12
‘Vayalar Garjikkunnu’ is the poem written by
Answer
C. P. Bhaskaran
13
The author of the Book ‘Animal Farm’ is
Answer
A. George Orvell
14
Which among the following is not a work by Sri Narayana Guru?
Answer
D. Atmavidya
15
The lowest velocity required for an object to overcome the gravitational force of the earth
Answer
A. 11.2 km/s
16
Which among the following is the famous painting by Pablo Piccaso?
Answer
B. Guernica
17
The poem Jathikkummi is written by which of the following Renaissance leaders of Kerala
Answer
C. Pandit K.P. Karuppan
18
The coal field in Orissa which Kerala lost in 2013 is
Answer
B. Baitharani {
19
Who among the following wrote the book ‘Saving Capitalism from Capitalists’ along with Luigi Zingales?
Answer
D. Raghuram G. Rajan
20
The cultural organisation known as ‘Vidyaposhini’ was oraganised by which of the following renaissance leaders of Kerala
Answer
D. Sahodaran Ayyappan
22
Consider elastic collision between two spheres A and B of equal masses. Let initially A travels at a speed 2m/s and B at rest then after collision speed of A becomes
Answer
C. Om/s
23
One horse power is equivalent to
Answer
D. 746W
24
Which of the following gates is known as universal gate?
Answer
B. NAND
25
Most powerful rays in electromagnetic spectrum
Answer
A. y rays
26
When light ray travels from one medium to another which of the following parameter does not change?
Answer
B. Frequency
27
Kirchhoffs second law for an electrical circuit refers to
Answer
C. Voltage
28
Principle behind the functioning of optical fiber is
Answer
D. TIR
29
Choose the relation between electric field and potential from the following
Answer
A. V=Ed
30
Which of the following mirrors are used as rear view mirrors?
Answer
D. Convex mirror
31
The symbol of the element Potassium is
Answer
B. K
32
Which of the following statement is true for an Acid?
Answer
C. Acid turns blue litmus red
34
Which of the following compound cause temporary hardness of water?
Answer
C. Magnesium Bicarbonate
35
The process of decomposition of an electrolyte when electric current is passed through them is called
Answer
A. Electrolysis
36
The Lead acid accumulator (Lead acid battery) is an example of
Answer
D. Secondary cell
37
The Self linking property of Carbon atoms in organic compound is called
Answer
A. Catenation
38
Teflon is a polymer of
Answer
D. Tetra fluroethylene
39
The major components of the fuel Water gas is
Answer
C. Carbon monoxide and Hydrogen
40
Energy is produced in nuclear reactor by
Answer
B. Nuclear fission reaction
41
Which one is the statement that not applicable for laws of static friction?
Answer
Question Cancelled
42
Acar starts from rest and moves with a constant acceleration of ‘a’ meter/second?. What is its velocity ‘v' after it has travelled for ‘s’ meters?
Answer
C. wv =u? +2as
43
A bike starting from rest is accelerated at the rate of 0.5 m/s*. Find the distance covered by the bike in 30 seconds
Answer
D. 225m
44
The moment of inertia of a rectangular section of width
Answer
B. and depth
46
Ifthe wall section thickness (t) and material constant (n) is given, the gate depth (h) has been found by the relation
Answer
C. h=nt
48
The fluid pressure can be measured by an instrument called
Answer
C. Manometer
49
The measure of the fluid's internal resistance offered to flow is
Answer
D. Viscosity 8 A
50
Give an example for positive displacement pump
Answer
A. Piston pump
51
Name the device capable of converting a direct current into a high frequency alternating current
Answer
D. Oscillator
52
Give an example of material used for semiconductors
Answer
C. Silicon
53
Name the user friendly digital electronic device/Electronic computer
Answer
A. PLC
54
The non-conventional sources of energy used for engineering power is
Answer
C. Wind power
76
Down milling is the process of removing the metal by a cutter which is rotated
Answer
A. In the same direction of travel of the work piece
77
An operation of enlarging a hole through a certain distance from one end, instead of enlarging the whole drilled surface is
Answer
C. Counter boring
78
Which one is not the element of a single point cutting tool?
Answer
D. Fillet
79
The welding method which is used for joining thin metal sheets
Answer
C. Resistance welding
80
Name the standard component used for making a press tool
Answer
Question Cancelled
82
The operation by which cutting a sheet metal through part of its length and then bending the cut is called
Answer
B. Lancing
83
The space between the mould parts, when the mould is open is called
Answer
D. Day Light 12 A
84
A channel or orifice connecting the runner to the impression is said to be
Answer
A. Gate
85
The instrument used to obtain an enlarged tracing of the surface irregularities is known as
Answer
B. Profilometer
86
A steel plate situated between the core and cavity plate in a multi-part design for the purpose of ejection is
Answer
D. Stripper plate
88
Cutting tools like drills, reamers and counter boring cutters are located and guided by
Answer
C. dig bushes
90
Give the name of device which supports lengthy work piece on a centre Lathe
Answer
C. Steady rest
91
Name the forging operation to increase the cross sectional area
Answer
B. Upsetting
92
For blanking operation, where ‘S’ is the size of the work piece and ‘C’ is the clearance, the punch size can be calculated by the relation
Answer
D. S-2C 13 (P.T.0.)
93
What is the angular clearance provided on die, that which cut out piece clears the die easily?
Answer
A. 0.5° to 2° {
94
The male portion of a mould which forms the internal shape of the moulding is
Answer
B. Core
95
Combine two cutting operation in a single stage press tool is called
Answer
D. Compound tool
96
The entire bend length of work piece does not come in contact with punch or die is
Answer
C. Air bending
97
The process of making cup shaped parts from sheet metal blank pulling into dies with the help of punch is called
Answer
A. Drawing
98
Where the surface area of cavity
Answer
A. in mm? and material constant (n) is given, the gate width (w) can be calculated by the relation?
99
Who is known as the Father of scientific management?
Answer
B. FW. Taylor
100
Which is the management technique suitable for planning, monitoring and controlling the projects?
Answer
D. PERT 14 A
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.