| Post Name | Draftsman Gr II/ Town Planning Surveyor Gr II, Draftsman (Civil) & Tradesman (Civil) - Town & Country Planning, KAMCO & Technical |
|---|---|
| Question Paper Code | 034/2022 |
| Category Code | 668/2021, 413/2019, 756/2021 |
| Date of Test | 3 April 2022 |
| Medium of Question | ENGLISH |
| Exam Type | OMR Examination |
| Total Questions | 100 |
1
Thickness of centre line and locus line is
Answer
D. .25 mm
2
Angle is formed between two
Answer
Question Cancelled
3
Scale represent three different units such as metre, decimetre and centimetre
Answer
C. Diagonal scale
4
All ellipse has _________ vertics and __________ foci.
Answer
A. two, two
5
Which grade of pencil is used for drawing arrow heads ?
Answer
B. 2H
6
Following is an enlarge scale
Answer
Question Cancelled
7
The front view of a line perpendicular to
Answer
Question Cancelled
8
10 centimetre is ____________ decimetre.
Answer
C. 1 decimetre
9
The unit measurement is in trusses for steel works and its parts in
Answer
B. quintel
10
Each question is provided with four choices
Answer
C. and
11
The rate of payment is made for 100 cum (per of cum) in case of
Answer
D. all of these
12
Which area is included in floor area ?
Answer
A. varandhas
13
Damp proof course
Answer
A. sqm
14
What is scrap value at the end of utility period of building ?
Answer
B. 10%
15
How much cum metre of cement is equal to one bag of cement ?
Answer
C. 0.034 cum
16
What is the name of the useful area or liveable area in building ?
Answer
D. carpet area
17
Which estimate is called item rate estimate ?
Answer
B. detailed estimate
18
What is the unit of measurement in MKS for brick work of thin partition wall ?
Answer
D. sq m
19
What is the unit measurement in the excavation of foundation ?
Answer
A. cum
20
The total estimate cost of a building sanitary and water supply work usually
account for
Answer
C. 8%
21
The increase in volume of dry sand when water is added is called
Answer
B. Bulking
22
The aggregate is called coarse aggregate if it is completely retained on
Answer
D. 4.75 mm seive
23
The compressive strength of stone is found out by
Answer
B. Crushing test
24
The quantity of one bag of cement is
Answer
A. 0.035 m3
25
The Kiln used for the manufacture of terra-cotta is
Answer
C. Muffle Furnace
26
The compressive strength of fire-bricks varies from
Answer
A. 200 to 220 N/mm2
27
The heating of limestone to redness in contact with air is known as
Answer
B. Calcination
28
An example for shrinkage-reducing admixture is
Answer
A. Propyline glycol
29
The part of tree, which hold together the annual rings of Hard wood and Sap wood is
Answer
A. Medullary rays
30
The carbon content of steel is
Answer
B. 0.10 to 0.25 Percent
31
The most common material used as vehicle of a paint is
Answer
D. Linseed oil
32
The ability of materials to get stretched into a wire by pulling or drawing is
Answer
A. Ductility
33
Horizontal Projections of head or sill beyond the face of door and window frame is
Answer
B. Horn
34
The window which is provided in a room which has greater ceiling height than the
surrounding room
Answer
A. Clere-storey window
35
A short sections of wood or steel which are fixed on the principal rafters of trusses
to support the purlin is
Answer
C. Cleats
36
The process of joining two wooden members at an angle is called
Answer
D. Mitring
37
In a residential building , the average value of stair width is
Answer
B. 900 mm
38
In ordinary residential building the DPC may be provided
Answer
C. At plinth level
39
Which chemical is used as a soil treatment in termite proofing ?
Answer
A. Aldrin
40
Type of bond in brick masonry consisting of alternate course of headers and stretchers
is called
Answer
D. English bond
41
The portion of the brick left after removing the corner equal to half the width and half
the length
Answer
B. King closer
42
The portion of the wall which support an arch is wall which
Answer
Question Cancelled
43
An arrangement for supporting an unsafe structure temporarily, till it is rendered safe
of dismantled
Answer
B. Shoring
44
When two footings are connected by a beam the, foundation is called
Answer
C. Strap footing
45
The corresponding proportion of M 7.5 concrete is
Answer
C. 1 : 4 : 8
46
Slump height of concrete for canal lining is
Answer
B. 70 to 80
47
Pile which are driven to an inclination to resist large horizontal or inclined forces is
Answer
C. Batter piles
48
An example for four centered arch is
Answer
B. Venetion arch
49
The maximum strength out of the shearing and bearing strength of the rivet for a
particular joint is
Answer
A. Rivet - value
50
As per IS 456, Modular ratio for M30 grade concrete is
Answer
B. 9.33
51
The sign convention for bending moments is that a beam in “hogging” condition is
Answer
B. Negative
52
Nominal cover provided for concrete exposed to moderate exposure should not be
less than
Answer
D. 30 mm
53
___________ is to make clear that which is not perfectly evident from numerals and
sketches.
Answer
B. Explanatory notes
54
The difference between two measured value of the same quantity
Answer
C. Discrepancy
55
Which of the following instrument is used radio wave for distance measurement ?
Answer
B. Telluro meter
56
lS CODE for metric surveying chain
Answer
B. lS 1492 -1970
57
If the chain is stretched out of the line the measured distance will always be
Answer
B. More
58
The true bearing of a line is a ___________ quantity.
Answer
B. Constant
59
The whole circle bearing of a line is 170 degree 12 minute what will be the reduced
bearing
Answer
A. 9 degree 48 minute
60
When the distance between the two point and the instrumentation is either too large
or cannot be measured which method is used in plane table ?
Answer
B. Intersection
61
____________ is a line passing through out on the surface of the ground and
preserving a constant inclination to the horizontal.
Answer
C. Contour gradient
62
The prismoidal correction is always
Answer
C. Subtractive
63
________ the method is based on the principle that the angle between the tangent
and the chord is equal to the angle which that code is subtended in the opposite
segment.
Answer
C. Two theodolite method
64
__________ of a survey line may be defined as its co-ordinate length measured
parallel to an assumed Meridian direction.
Answer
A. Latitude
65
___________ aIIows the user to capture collect and transform spatial and the thematic
data into digital form.
Answer
C. Data input system
66
Which program is used for erecting perpendicular line to base line ?
Answer
C. Reference line
67
What is the distance of the load from the fulcrum called ?
Answer
C. Load arm
68
The work done in unit time is called
Answer
B. Power
69
One metric HP is ___________ watts.
Answer
A. 735.5
70
The capacity of a body to do work is known as
Answer
C. Energy
71
How many litres of water in a cylindrical tank of radius 75 cm and height 100 cm can
hold ?
Answer
C. 1766.25 lit
72
Deformation per unit length in the direction of force is known as
Answer
C. Linear strain
73
The axis used to show depth in AutoCAD
Answer
D. Z axis
74
Which command convert discrete object in polyline ?
Answer
C. Join
75
________ sets the spacing between the dimension lines of a base line dimension.
Answer
C. Base line spacing
76
What setting gradient allows us to fill an open area ?
Answer
B. Tolerance
77
Which of the following file extension cannot open the AutoCAD ?
Answer
Question Cancelled
78
What is the minimum allowable number of layers in a drawing ?
Answer
C. 1
79
Which of the following is not a property of an object ?
Answer
B. Measure
80
The mechanical advanlag of an ideal machine is 100. For moving the local through
2 m, the effert moves through
Answer
Question Cancelled
81
The percentage of C.C.A. proposed to be irrigated seasonally is called
Answer
D. Intensity or irrigation
82
When seepage water is sufficient for the growth of the crop and if no addition surface
watering is necessary, such a dam is called
Answer
C. Water spread dam
83
Ganga Canal System is an example of
Answer
A. Direct irrigation
84
An opening provided in one side of a reservoir, with upstream liquid level below the
top edge of opening is called
Answer
B. Notch
85
Structure provided to protect the land and property which is likely to be submerged
during ponding of water of during floods is
Answer
C. Marginal embankments
86
Mechanism that receives data from the wind vane and instructs the wind turbine to
rotate to be facing the wind is called
Answer
D. Yaw drive
87
When wheels slide without revolving the phenomenon is called
Answer
A. Skidding
88
Recommended land width of major district roads in open areas in plain and rolling
terrain in meters
Answer
C. 25
89
The method of construction of cement concrete roads where entire width of the road
is constructed continuously from one end to the other is called
Answer
D. All of the above
90
Culvert suitable in high discharge areas and low debris flow areas are
Answer
A. Arch culvert
91
Which pier is adopted, if the longitudinal beams or girders of the superstructure of
bridge are closely spaced ?
Answer
D. Column bents
92
Structure made of stones or concrete blocks or mattresses, placed on the bottom or
banks of a river for minimizing and controlling the erosion
Answer
B. Revetment
93
Standard size of ballast for C.T.S.-9 and steel sleepers
Answer
C. 40 mm
94
The defect caused when the rail with its end or ends bent in vertical direction is
called
Answer
C. Hogging of rails
95
Which is the structure constructed in the form of a chamber along the sewer line to
admit clear rain water into the combined sewer ?
Answer
A. Catch basin
96
Slow sand filter is unsuitable for waters having turbidity more than
Answer
B. 50 ppm
97
What is the yield of rapid sand filters as compared to slow sand filter ?
Answer
C. 30 times
98
Water taps are also known as
Answer
A. Bib cocks
99
Valves provided to remove the accumulated silt is called
Answer
D. All of the above
100
The sloped floor of a manhole or inspection chamber on both side and above the
top of the channel is called
Answer
D. Benching
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.