| Post Name | ENGG.ASST.GR.III/ WORK SUPDT./OVERSEER.GR.III - KSCC LTD/PWD/AGRI. |
|---|---|
| Question Paper Code | 008/2021 |
| Category Code | 024/2019, 131/2019, 132/2019, 336/2019, 551/2019, 037/2020 |
| Date of Test | 8 January 2021 |
| Medium of Question | ENGLISH |
| Exam Type | OMR Examination |
| Total Questions | 100 |
1
The trimmed standard size of A1 drawing sheet is _______.
Answer
D. 594 mm 841 mm
2
Visible out lines are drawn as ______ lines.
Answer
C. Continuous thick
3
Which of the following instrument is used to draw parallel lines at any angle ?
Answer
B. Clinograph
4
French curves are used to
Answer
A. Draw irregular curve
5
In aligned system of dimensioning, the dimensions may be read from
Answer
D. Bottom or right hand side
6
If a right angled triangle is made to revolute about one of its perpendicular sides, the
solid formed is known as
Answer
B. Cone
7
In the first angle projection method, object is assumed to be placed in
Answer
C. First Quadrant
8
The unit of RF is ______.
Answer
D. None of these
A 3 008/2021
9
Diagonal scale is used to measure
Answer
A. Three dimension
10
The point P is above horizontal plane and behind vertical plane. The point is in the _____
quadrant.
Answer
B. Second
11
The fundamental principle of surveying is
Answer
C. To work from whole to part
12
Chainage in chain survey means
Answer
D. The distance of the object along the chain line from the zero end of the chain
13
The box of prismatic compass box is made up of
Answer
B. Brass
14
True meridian passes through
Answer
C. True north and true south
15
Plane table surveying is
Answer
D. All of the above
16
The instrument used for orienting plane table is
Answer
A. Trough compass
17
The first observation taken on turning point is
Answer
A. Fore sight
18
The Bench Mark established by Survey of India is known as
Answer
D. GTS Bench Mark
19
What is the imaginary line joining the centre of the eye piece and the optical centre of the
object glass in theodolite ?
Answer
A. Axis of telescope
20
The contour interval depends upon the
Answer
D. All of the above
21
Contour interval is
Answer
A. The vertical distance between two consecutive contours
22
The vertical circle is a circular graduated arc attached to the _______ axis of the
telescope.
Answer
D. Trunnion axis
23
A total station is a combination of
Answer
C. Electronic Theodolite and EDM
24
How is the size of theodolite defined ?
Answer
A. Diameter
25
How many inches in one foot ?
Answer
D. 12
A 5 008/2021
26
Full form of CADD is
Answer
B. Computer Aided Design and Drafting
27
Which command to control the size of the drawing area ?
Answer
C. Limits
28
The Auto CAD command to edit the length of the object is
Answer
B. Stretch
29
The Auto CAD command to draw rounded corner is
Answer
D. Fillet
30
To obtain parallel lines, concentric circles and parallel curves ______ is used.
Answer
C. Offset
31
The extension for AutoCAD template file is
Answer
B. .dwt
32
Which among them is not an option for starting print command ?
Answer
D. PR
33
To plot only a particular portion of a drawing, which option can be selected in plot area
panel of PLOT window ?
Answer
C. Window
34
Le Chatlier apparatus is used to determine _______ of cement.
Answer
C. Soundness
35
Volume of One bag of cement is ______ m 3.
Answer
B. 0.035
36
The lowermost part of the structure which supports the superstructure and transmits loads
of the superstructure to the bearing materials.
Answer
B. Sub-structure
37
The quotient obtained by dividing the total covered area of all floors by the area of the
plot
Answer
C. F.A.R.
38
An impervious barrier constructed across the river to raise the water level is
Answer
D. Weir
39
Ten Hectares = _______ acres.
Answer
Question Cancelled
40
Capillary like structure within the body of a tree that run radially from the core to the
bark
Answer
A. Medullary rays
41
Plasticity giving ingredient in Brick earth
Answer
C. Alumina
42
The bond having alternate headers and stretchers in face but alternate courses of headers
and stretchers in back
Answer
C. Single Flemish
43
The defect indicated by white spots in a healthy wood is
Answer
B. Druxiness
44
Annual rings are the combination of
Answer
A. Heartwood & Sapwood
45
The irregular triangular walling enclosed by the extrados of the arch, a horizontal line
from the crown and a perpendicular line from the springing of the outer curves
Answer
D. Spandril
46
The foundation in which a cantilever beam is provided to join column footings
Answer
B. Strap footing
47
The floors used in dancing halls, auditoriums etc.
Answer
A. Wooden floor
48
A two storey truss with upper portion consisting of the king post truss and lower portion
of queen post truss
Answer
C. Mansard truss
49
Burning temperature of cement in rotary kiln
Answer
Question Cancelled
50
The most common type of scaffolding used in the construction of brickwork
Answer
D. All of the above
51
The process of strengthening of foundation of an existing building
Answer
C. Underpinning
52
The total time between the first watering after sowing a crop and the last watering before
its harvesting
Answer
A. Base period
53
The total length of a cranked bar, the depth
Answer
C. L + (2*0.42D)
54
Minimum crushing strength of a brick is
Answer
D. 3.5 N/mm2
55
The coarse sand passing through a screen with clear openings of ______ is generally
used for masonry work.
Answer
C. 3.175 mm
56
The property of a lime to set in damp places or in thick masonry is known as
Answer
B. Hydraulicity
57
Horizontal circulation area of a building may be _______ % of the plinth area of the
building.
Answer
D. None of the above
58
It is the value at the end of utility period without being dismantled is
Answer
D. Salvage value
59
The ratio of weight of material per unit volume to the weight of an equal volume of water
at 4 C
Answer
D. Specific gravity
60
Siphon Aqueduct is a cross drainage work provided to carry canal over a natural drain
when
Answer
B. Canal bed is below the H.F.L. of the natural drain.
61
The relation between duty D in hectare/cumec, delta Δ in metres and base period B in days is given by:
Answer
A. Δ = 8.64 B/D
62
The geological formation that contain sufficient permeable materials or unconsolidated
materials such as sand and gravel
Answer
C. Aquifer
63
The estimate in which approximate total length of wall is found in running metre and this
total length multiplied by the rate per running metre of wall gives a fairly accurate cost
Answer
D. Approximate quantity method
64
At constant pressure, the volume (V) of a given mass of gas is directly proportional to its
absolute temperature (T)
Answer
B. Charles’ Law
65
The law states that pressure applied at any point in a liquid at rest is transmitted equally
in all directions
Answer
C. Pascal’s Law
66
Hydrodynamics is the study of ______ in motion.
Answer
A. Liquid
67
In perfect gas equation, the absolute temperature is calculated in terms of
Answer
B. Degree Kelvin
68
The maximum ratio of span to depth of a Cantilever slab is
Answer
B. 12
69
The process of proper and accurate measurement of concrete ingredients, on the basis of
either weight or volume, for uniformity of concrete mix is known as
Answer
D. Batching
70
The manner of arrangement of rooms or peculiarity of arrangement of doors and
windows in the external walls of the building to receive maximum effect from sun and
wind is called
Answer
A. Aspect
71
When the plot area is 210 m2 to 1000 m2, then the permissible covered area of the site
should be _____ of the site area.
Answer
Question Cancelled
72
These group include any building used for school, college and other training institutions
for day care purposes involving assembly for instruction, education or recreation for not
less than 20 students
Answer
B. Group B
73
The plan which shall be drawn to the same scale as the building plan and shall include
plans and sections of private water supply and sewage disposal systems
Answer
B. Service plan
74
One cubic metre of mild steel weights about
Answer
D. 7850 kg
75
The painting co-efficient for partly panelled and partly glazed doors or gauged doors for
both sides
Answer
C. 2
76
In analysis of rate, the quantity of dry mortar for 100 cubic metre brick work is taken as
Answer
B. 30 m3
77
In absence of detailed drawings, the percentage of steel, in concrete columns is usually
taken as
Answer
C. 1 to 5%
78
The cabin like structure with a covering roof over the staircase is known as
Answer
B. Mumty
79
The quantity of cement required for a concrete mix of 1 : 2 : 4
Answer
A. 316.8 kg
80
A habitable space on the roof of the building with or without toilet facilities
Answer
C. Barsati
81
The mean horizontal distance between the front and rear plot boundaries is called as
Answer
B. Depth of plot
82
The Swani crops are also known as
Answer
Question Cancelled
83
This is the structure in which the drainage passes over the irrigation canal
Answer
A. Super passage
84
The channel or pipe through which carries away water from the power house after it has
been passed through the turbine is known as
Answer
C. Tail race
85
The flow of water through the particles of soil due to the force of gravity or pressure of
head is known as
Answer
B. Percolation
86
A crop requires a depth of 200 cm of water for a base period of 100 days, duty of water is
Answer
Question Cancelled
87
A graph showing variations of discharge with time at a particular point of a natural steam
or river
Answer
C. Hydrograph
88
The first watering before sowing the crop is known as
Answer
B. Paleo
89
Which one of the equations given below is an equation of motion?
Answer
A. v − u = at
90
Which law states that strain is proportional to stress within elastic limit ?
Answer
D. Hooke’s Law
91
An effort of 50 kg applied to a simple machine having a velocity ratio of 5 and 80%
efficiency, what is its mechanical advantage ?
Answer
C. 4
92
At ground level the potential energy of a body is
Answer
B. Zero
93
The ratio of shear stress to shear strain is known as
Answer
A. Modulus Rigidity
94
Bending moment at supports in case of simply supported beam is always
Answer
B. Zero
95
180° = ______ radian
Answer
A. π
96
1 micron = ______ metre
Answer
B. 10–6
97
If one angle of a triangle is equal to the sum of the other two angles, then the triangle is a
_____ triangle.
Answer
B. Right angled
98
If the radius of the cylinder is doubled, then its volume will be
Answer
C. Four times
99
What is the area of a trapezium of sides ‘a’ and ‘b’, and the distance between them is
‘h’ ?
1
Answer
A. +
100
Vertex angle of a pentagon is _____ and base angles are ______.
Answer
Question Cancelled
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.