| Post Name | II GRADE OVERSEER/DRAFTSMAN (CIVIL)/OVERSEER GRADE II(CIVIL) |
|---|---|
| Question Paper Code | 090/2025 |
| Category Code | 008/2024, 293/2024, 736/2024 |
| Date of Test | 25 August 2025 |
| Medium of Question | ENGLISH |
| Exam Type | OMR Examination |
| Total Questions | 100 |
1
The size of drawing board designation d2 is in _________ mm.
Answer
C. 700 Γ 500 Γ 15
2
The area of A0 paper is nearest
Answer
D. 1 m2
3
The drawing board is made of narrow strips joined together by tongue and groove
joints to
Answer
A. Prevent wrapping
4
The line H chain thin, thick at ends and changes of direction is used to indicate
Answer
B. Cutting plane
5
The isometric projection of a sphere is
Answer
B. Circle
6
Irregular curves neither circles nor circular arcs are drawn by using
Answer
D. French curves
7
A straight line joining any two parts on a conic in a parabola is known as
Answer
B. Chord
8
In Gothic lettering, the thickness of stems vary from
Answer
A. 1/5 to 1/10
9
An estimate to know the approximate amount of expenditure
Answer
C. Preliminary estimate
10
For public halls, cinema halls or library buildings etc. ________ is more accurate.
Answer
D. Cubic rate estimate
11
The unit of supplying and stacking stone aggregate 50 mm nominal size is
Answer
B. Cu.m.
12
The quantity of work per day for RCC flooring is
Answer
Question Cancelled
13
The amount paid every year towards the capital invested by a party is known as
Answer
C. Annuity
14
The book value represents
Answer
D. Actual book cost
15
An amount required to deposit by the contractor with tender document as a guarantee
to the department is known as
Answer
C. Earnest money deposit
16
An intermediate storage area laying between two main floors is known as
Answer
Question Cancelled
17
Which of the following is not considered in plinth area ?
Answer
Question Cancelled
18
The procedure of valuing an item on the basis of the materials and labours used
actually is known as
Answer
B. day work
19
The measurement of damp Proof Course is taken in ______ stating thickness.
Answer
D. m2
20
White washing area shall be worked out to the nearest
Answer
A. 0.01 m2
21
The art of extracting stone from the rock beds is called
Answer
D. Quarrying
22
What is the water absorption capacity of second class bricks, when soaked in cold
water for 24 hrs ?
Answer
C. 22%
23
lime containing more than 30 percentage impurities like clay is called
Answer
A. Poor limes
24
What is the temperature in burning zone while manufacturing of cement ?
Answer
D. 1400Β° C to 1500Β° C
25
Which of the following that increase the flow ability and reduce water-cement ratio
of concrete ?
Answer
C. Superplasticizers
26
Why avoid the use of sea sand for engineering works ?
Answer
D. Causes dampness and efflorescence
27
A term which is used to indicate substances that are able to resist high
temperature
Answer
C. Refractories
28
The mortar having bulk density of 15 km/mm3 or more are known as
Answer
A. Heavy mortar
29
The process which expels entrapped air from freshly placed concrete and packs the
aggregate particles together and increase the density of concrete is called
Answer
C. Consolidation of concrete
30
The timber which is fully or partially covered with resin and then cured at a temperature
of about 150Β°C β 160Β°C is known as
Answer
D. Impreg timbers
31
A substance which hold the ingredients of a paint in a liquid suspension is called
Answer
B. Vehicle
32
An alloy of copper and tin is known as
Answer
A. Bronze
33
What is the name of horizontal member parallel to the wall in single scaffolding ?
Answer
B. ledgers
34
How many days after casting the form work of beam soffit can be removed ?
Answer
A. 7 days
35
Safe bearing capacity of soil is equal to
Answer
B. Ultimate bearing power/factor of safety
36
minimum clear cover for columns should be
Answer
D. 40 mm
37
Unit weight of 25 mm diameter of bar is
Answer
A. 3.85 kg/m
38
Which type of light weight scaffolding is used for painting in high rise buildings ?
Answer
B. Suspended scaffolding
39
The vertical sides of a finished opening for door and windows is known as
Answer
D. Jamb
40
What is the primary purpose of βfrogβ in a brick ?
Answer
C. To improve bonding with mortar
41
What is the purpose of cofferdam in construction ?
Answer
C. To prevent water entering the construction area
42
The end support of the arch is known as
Answer
C. Abutment
43
The lower half of the arch between the crown and skewback is known as
Answer
B. Haunch
44
The apex line of a sloping roof is known as
Answer
D. Ridge
45
The inclined structural member supporting the roof covering is called
Answer
B. Rafter
46
A valley in a sloping roof is
Answer
B. The point where two sloping roofs meet to form an internal angle
47
Which type of flooring is considered eco-friendly and sustainable ?
Answer
D. Bamboo flooring
48
What is the main disadvantage of wooden flooring ?
Answer
Question Cancelled
49
The process of joining steel components by melting and fusing them together is
called
Answer
C. Welding
50
For a U shaped hook, the additional length required foe one hook is
Answer
A. 9 d
51
What is the name of the projecting part of tread beyond the face of riser ?
Answer
B. Nosing
52
The pitch of a stair should not exceed
Answer
D. 40Β°
53
The neat hand sketch of the area which is prepared during reconnaissance survey
is known as
Answer
B. Index sketch
54
In compass surveying, to obtain relative closing error the following formula is used
Answer
A. Amount of closing error/Perimeter of traverse
55
The dGPS technique is based on using at least __________ GPS receivers.
Answer
A. 2
56
The magnetic bearing of a line AB is S 30Β°15β² W. Find its true bearing, if the declination
is 10Β°15β² E.
Answer
C. S 40Β°30β² W
57
The principle of plane tabling is
Answer
A. Parallelism
58
Any line lying on the horizontal plane is known as
Answer
D. Horizontal line
59
The angle between the horizontal line and tangent line is known as
Answer
B. dip of the horizon
60
For plotting of profile (longitudinal section) vertical scale is _________ times the
horizontal scale.
Answer
B. 10
61
The line of intersection of a level surface with the ground surface is known as
Answer
C. Contour line
62
Indirect method of contouring using squares, the size of square varies from
Answer
Question Cancelled
63
What is the quantity of filling, given the ground level as 115.20 and formation level
as 116.50 ?
Answer
A. 1.30
64
In railway curves the unit chords (peg intervals) are generally taken between
Answer
D. 20 and 30 m
65
lt is the angle which a survey line makes with the extension of the preceding line is
Answer
C. Deflection angle
66
While using total station quick setting of the instrument on the tripod by using
Answer
D. laser plummet
67
Which dam is constructed to impound water to its upstream side during the period
of excess supply in the river ?
Answer
B. Storage dam
68
Based on the function of canal, the canal has been classified into
Answer
C. Irrigation canal, power canal, navigation canal, link canal
69
The area in which crop can be grown satisfactorily
Answer
A. Culturable Command Area
70
Which is provided in diversion head work to scour away silt deposited ?
Answer
D. Under Sluice
71
The ratio of the number of cumec days to the number of days canal has actually
been used for irrigation is
Answer
A. Time factor
72
large pipes for carrying water under pressure from storage reservoirs to turbines
Answer
A. Penstock
73
Which of the following statement is correct in case of guide or channellising island ?
i. Controlling the speed of vehicles
ii. For the removal or diversion of water from highway
iii. Protection of pedestrians
iv. Providing structural stability to the pavement
Answer
B. Only i and iii
74
For earthen roads, the camber should be
Answer
Question Cancelled
75
Vignoles rail is also known as
Answer
A. Flat footed rail
76
Rail chairs are mainly used to fix
Answer
B. Bull headed rail and double headed rail on sleepers
77
Ballast size used for wooden sleeper track should be
Answer
D. 50 mm
78
Which of the following statement is correct in case of through bridge ?
Answer
B. The flooring of the bridge which carries the traffic is supported at the bottom of the
main girder of bridge
79
The heading up of the water above its normal level while passing under the bridge,
is known as
Answer
C. Afflux
80
The standard size of a wooden sleeper for a Broad Gauge
Answer
A. 275 Γ 25 Γ 13 cm
81
How many millimeters are there in one inch ?
Answer
B. 25.4 mm
82
Capacity of a body to do work is called
Answer
A. Energy
83
What is the side of a square whose area is 625 mm2 ?
Answer
C. 25 mm
84
How many degrees is equal to one radian ?
Οο― ο―
Answer
D. 180 Ο
85
What is the unit of strain ?
Answer
D. No unit
86
In an ideal machine
Answer
D. velocity ratio = mechanical advantage
87
Both ends of the pipes are plain or spigot the joint used is
Answer
A. Mechanical joint
88
The drainage pipe that carries liquid waste containing human excreta
Answer
A. Soil pipe
89
The water treatment in which very fine colloidal and suspended particles and micro
organisms are removed
Answer
C. Filtration
90
The structure constructed in the form of a chamber along the sewer line to admit
clear rain water into the combined sewer
Answer
C. Catch basins
91
BOd stands for
Answer
B. Bio-chemical Oxygen demand
92
These are small sized screw down types of sluice valves installed in service
connections
Answer
D. Stop cocks
93
What is the command to the first icon in the draw panel ?
Answer
A. line
94
Which command is used to create a line of infinite length ?
Answer
B. XlINE
95
Command for saving current document file is
Answer
C. Ctrl+S
96
Shortcut key for polar tracking on/off command is
Answer
D. F10
97
Select a modifying command
Answer
B. Rotate
98
Which command is used to get a 3d view of an object ?
Answer
B. VPORT
99
Which file format is used to review 2D drawings in 3D programs ?
Answer
A. dWG
100
Which command is used to set a drawing screen to A4 size ?
Answer
D. lImIT
Discussion
Ask a doubt or share a tip.
No comments yet β start the discussion.