| Post Name | Junior Instructor in Tailoring and Garment Making Training Centre - Technical Education |
|---|---|
| Question Paper Code | 001/2025/OL |
| Category Code | 687/2023 |
| Date of Test | 8 January 2025 |
| Exam Type | Online Examination |
| Total Questions | 100 |
1
Basting is an example of
Answer
A. Temporary stitch
2
What is the cause of staggered stitch ?
Answer
B. Too little pressure on presser foot
3
Find the odd one out.
Answer
A. Shank
4
Who invented lock stitch sewing machine in 1832 ?
Answer
C. Walter Hunt
5
Throat plate is otherwise known as
Answer
A. Needle plate
6
How many stitches per inch should be used for light woolen fabric ?
Answer
C. 10-12
7
Which type of Needle is used to sew narrow, parallel line, or to make pin tuck ?
Answer
A. Twin needle
8
Finger guard is used to
Answer
B. To prevent finger through Needle damage
9
Loop or loops of one/more threads when bound with each other by interlooping or interlacing is known as
Answer
B. Stitch
10
A metal hook near the tension disc is known as
Answer
C. Slack thread regulator
11
Straw needle is otherwise known as
Answer
A. Milliner needle
12
Which types of thread are mostly used in Embroidery work ?
Answer
B. Stranded cotton thread
13
What is the name of tool to hold and stretch the fabric to a desire firmness and tightness while doing embroidery ?
Answer
A. Embroidery frame
14
Sharp tip pointed small scissors is otherwise known as
Answer
C. Micro tip scissors
15
Variation of stem stitch is
Answer
D. Split stitch
16
Kantha on sankrit means
Answer
B. Rag
17
A precious red coloured Phulkari prepared and presented by the maternal grandmother of the bride at her wedding function
Answer
A. Chope
18
In Gujarat the embroidery famous is
Answer
C. Kutch work
19
Name the tool designed for turning the fabric tube rightside out after it has been sewn
Answer
B. Loop turner
20
Needle points are mainly classified into
Answer
A. 2
21
Name the fabric can be used for chikankari work
Answer
D. All of these
22
Tambour Embroidery originated in
Answer
B. India
23
Which among the following is true with respect to kantha work of Bengal ?
Answer
B. Running stitch is the main stitch of this Embroidery
24
What is the use of hole punch ?
Answer
A. Making holes in card
25
Constructive stitches are divided into
Answer
C. Temporary and permanent stitches
26
What is the use of Tailors tack in sewing ?
Answer
A. Transfer marks on a lower layer of fabric
27
Single Needle lock stitch machine is used for stitching
Answer
D. All of the above
28
What is the major function of pressure foot lifter ?
Answer
C. For raising and lowering the presser foot
29
Find the odd one out
Answer
D. Murri
30
The stitch that can be used to decorate the edge is
Answer
C. Blanket
31
One of the surface ornamentation technique is
Answer
A. Embroidery
32
Example of looped stitch is
Answer
D. Chain stitch
33
What is the major function of take up lever ?
Answer
C. To feed the thread to the needle
34
Sewing Needles are made of
Answer
B. Nickel plated steel
35
Transferring of design with the help of
Answer
C. Tracing paper
36
Which is the major content of vegetable fibres ?
Answer
B. Cellulose
37
The fibre which has a mineral origin is
Answer
D. Asbestos
38
Mercerisation of cotton doesnot improve
Answer
B. Colour
39
Polymers are macromolecules built up by linking up of large number of
Answer
B. Monomers
40
Moisture regain percentage of ramie fibre
Answer
C. 12
41
The fabric in which a proportion of the threads either warp or weft are made to project at right angles from a foundation texture
Answer
D. Pile Fabric
42
The outer waxy layer of cotton fibre is
Answer
B. Cuticle
43
Which is not a bast fibre ?
Answer
B. Cotton
44
Cross section of wool fibre is usually
Answer
D. Oval
45
Process of removing sericin from silk filament
Answer
A. Degumming
46
Which one is a meta-aramid fibre ?
Answer
C. Nomex
47
Choose the strongest textile fibre available today
Answer
D. Kevlar
48
Identify the odour of silk while burning
Answer
C. Similar to burning hair
49
Fabric thickness is related to
Answer
C. Sum of yarn diameter and crimp height
50
Choose the finest cotton variety from the given list
Answer
A. Sea island cotton
51
The darts which are wide in the middle and pointed at both ends are called
Answer
D. Full darts
52
Contour dart is a variation of
Answer
B. Full dart
53
Pick the odd one out
Answer
A. Side seam
54
Which among the below is not a supporting seam technique ?
Answer
B. Piping
55
Pleat width is
Answer
B. The distance between two neighbouring outer folds
56
If the pleat width = pleat depth, the pleats are called
Answer
C. Normal pleats
57
Which among the given tucks can be used for shaping a garment ?
Answer
C. Dart tucks
58
A tucker foot can be used for making tucks upto
Answer
A. 2.5 cm in width
59
Which among the given statements is correct about ladies garments ? i) Placket should lap left over right ii) Placket should lap right over left iii) Plackets either lap left over right or right over left
Answer
B. Only ii is correct
60
The basic type of zipper is
Answer
D. Chain zipper
61
What to do for avoiding wrinkles on the outer edge of a patch pocket ?
Answer
B. Ease stitch should be given on the curved area before stitching
62
Widest part of a sleeve pattern may termed as
Answer
C. Biceps level
63
In slashed pockets, if the lip piece is wider-the pocket is called
Answer
A. Welt pocket
64
A useful tool to bring out the corners of collar after turning to right side is
Answer
D. Bodkin
65
Name the collar which has a 'V' shape in front and square at the back
Answer
B. Sailor collar
66
Which color scheme used only a single color and its tints and shades ?
Answer
C. Monochromatic
67
In which color scheme you can see the combination of yellow with red- violet and blue-violet ?
Answer
C. Split complementary
68
Which color scheme has the combination of colors next to each other on the color wheel ?
Answer
A. Analogous
69
Brightness or dullness of a color is referred to as
Answer
D. Intensity
70
A color scheme that includes only those colors that are not found on the color wheel
Answer
B. Neutral color scheme
71
Which hues are known as advancing hues ?
Answer
A. Warm hues
72
Which among the following is an example for diad color scheme ?
Answer
A. Blue and violet
73
Which among the following is an example for secondary color ?
Answer
C. Violet
74
The combination of pink, red and maroon can be seen in which color harmony
Answer
C. Monochromatic
75
How many tertiary colors are there in the color wheel ?
Answer
D. 6
76
Triangular shaped wedges of fabric placed between seams into slits or a replacement for cut-out sections
Answer
C. Godet
77
What is used to shape a garment around the contours of the body ?
Answer
B. Dart
78
Temporary stitch used for holding two or more layers of material together before permanent stitches are made
Answer
A. Basting
79
The process by which the iron is lifted up and set down on the fabric in a series of up and down motion in lengthwise and cross wise direction is known as
Answer
D. Pressing
80
The process of cutting unnecessary threads from the finished garments
Answer
B. Trimming
81
What is the slowest form of knitting usually made on machines with two needle beds and double latch Needles ?
Answer
B. Purl knits
82
Which indicated the fineness of the stitch in knitting ?
Answer
C. Gauge
83
What is the process in which a warp beam is set into a machine and yarn sets are interlooped to form a fabric ?
Answer
B. Warp knitting
84
Number of wales and courses per square inch of a knitted fabric is called
Answer
Question Cancelled
85
In knitting, what is defined by describing the number of stitches, not yarns in a specific direction
Answer
B. Fabric density
86
What is the method of producing vertically-oriented patterning with warp threads on a single Jersey weft knitted base structure ?
Answer
A. Warping
87
Which is a special method of producing designs in knitted loops that form self contained areas of pure colours ?
Answer
D. Intarsia
88
Which knit is identified by its difficult designs and three dimensional surface pattern, used to make lace, sweater, swim suit etc. ?
Answer
A. Raschel knit
89
The line of loops present along the length of the fabric is known as
Answer
D. Wales
90
It is a secondary weft knitting element which may be used to provide versatility of latch needle selection and movement
Answer
B. Jack
91
Why grain lines are drawn on pattern pieces while drafting ?
Answer
B. Patterns placed on correct grain line of fabric
92
How a person's broad face and short neck can be shown longer ?
Answer
C. Wear long pointed collar
93
Methods that include pattern making are
Answer
D. All of these
94
Pattern of the dress is made of
Answer
B. The half part
95
Which of the following pattern are available in the market ?
Answer
A. 36”, 34”, 32”
96
The drawing made according to paper pattern is called
Answer
A. Drafting
97
These types of paper patterns are available in ready-made form
Answer
C. Commercial paper pattern
98
Drafting can also be called
Answer
A. Block pattern method
99
A _____ is the starting point for flat pattern designing.
Answer
C. Sloper
100
______ is a pattern making tool used to shape arm hole
Answer
A. French curve
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.