| Post Name | Offset Printing Machine Operator Gr II/Reader Gr II 607/23,675/23,681/23 |
|---|---|
| Question Paper Code | 118/2024 |
| Category Code | 607/2023, 675/2023, 681/2023 |
| Date of Test | 2 September 2024 |
| Medium of Question | ENGLISH |
| Exam Type | OMR Examination |
| Total Questions | 100 |
1
mention the term that received the print.
Answer
D. Printing substrate
2
In which type of printing is ink transferred through the small pores ?
Answer
D. Screen printing
3
Who invented the lithographic plate ?
Answer
A. Aloise Senefelder
4
The preparation of ‘artwork’ is which step in the print production work flow ?
Answer
B. Creative work
5
Flat bed cylinder press is the example of
Answer
C. Relief printing
6
Which equipment is used for electronic colour separation given below ?
Answer
A. Scanner
7
Red filter is used to produce _________ plate.
Answer
C. Cyan
8
Choose the correct wavelength of visible light given below.
Answer
D. 400 – 700 nm
9
Choose the name of the equipment given below, which has PmT as its main part.
Answer
A. drum scanner
10
Which light represents the mixture of all colors ?
Answer
B. White
11
Name the colour measurement device used in offset printing.
Answer
B. densitometer
12
Choose which one is the printing problem given below.
Answer
A. Ghosting
13
A printing sheet shows an unwanted accumulation of halftone dots that result in a
smeared image. Can you identify the problem ?
Answer
C. Slurring
14
Name the mechanism used to replace a new roll of paper in the feed cycle without
stopping the press.
Answer
C. Splicer
15
An expansion of GATF is
Answer
A. Graphic Arts Technical Foundation
16
The operations _________ refers to the procedures preparing the press to print a
particular job.
Answer
B. make ready
17
Find the operation which is not included in pre make ready checks.
Answer
D. Positioning the image on the paper
18
pH range of fountain solution for offset printing
Answer
C. 4.5 – 5.5
19
Double Sheet detector is a part of _________ unit of an offset machine.
Answer
A. Registration
20
The hardness of a blanket is measured by _________ instrument.
Answer
A. durometer
21
The gradual disappearance of the image areas from the plate in offset printing is
called
Answer
D. Plateware
22
Select the wrong statement/statements about crease formation on paper.
1. Incorrect settings on the sheet feeder.
2. Incorrect air-pressure setting at the point of sheet transfer.
3. Printing pressure between the rubber and impression cylinder is too high.
4. Loose fitting plate on cylinder.
Answer
C. 4 only
23
In Ink, VOC is the abbreviation for
Answer
A. Volatile Organic Compounds
24
The _________ occurs when small particles torn out of the surface of the paper
during printing process.
Answer
D. Picking
25
Chalking is an example for _________ in offset printing.
Answer
A. Ink problem
26
Identify the term that is usually a distinct text-only typographic treatment of the name of
a company, institution or product name.
Answer
D. Word mark
27
The pattern created when all four-color halftone conventional screens are placed at the
traditional angles is called
Answer
C. Rosette pattern
28
Name the process used for removal of material from the surface of an object by
vaporization, chipping or other erosive processes.
Answer
A. Ablation
29
Which is the proofreading mark for “let it stand” where the change should be disregarded
and the original is correct ?
Answer
B. Stet
30
Software that acts as an intermediary between a CPU and a peripheral device
Answer
C. device driver
31
What is the file extension of Adobe InDesign software ?
Answer
D. Indd
32
Name the term where first line of a paragraph that appears at the bottom of a page or
column, with the rest of the paragraph on the next page or column.
Answer
A. Orphan
33
Which of these is an ultra-high resolution large-format computer output device
for CTF ?
Answer
B. Image Setter
34
device that modifies information into the required transmission format
Answer
D. Encoder
35
Identify the digital printing process.
Answer
C. Inkjet
36
Name the term that refers to relative thickness of text of a given size.
Answer
B. Font weight
37
What could be the reason for uneven image transfer in offset printing ?
Answer
D. All the above
38
Name the transmission system capable of carrying many channels of communication
simultaneously by modulating them on one of several carrier frequencies.
Answer
B. Broadband
39
Ink pigment does not bind to stock, identify this defect.
Answer
A. Chalking
40
What is the term used for printing material such as planned film or plates used on a
previous job which are retained pending a possible reprint ?
Answer
B. Standing matter
41
A computer program that is written and design for a specific need or purpose
Answer
A. Application program
42
Which is the mark that is added to a letter to specify a specific accent or
pronunciation ?
Answer
C. diacritic
43
Succeeding ink printed does not adhere to previously dried ink. Why ?
Answer
B. Both
44
When two objects of different color overlap in an artwork. Some times, the bottom color
is removed. Name this process.
Answer
D. Knock out
45
Which of these is a computer’s startup operation ?
Answer
A. Boot
46
The term aniline printing is related to
Answer
A. Flexography
47
The word paper is derived from
Answer
B. Papyrus
48
Which of the following is bio-degradable inks ?
Answer
D. Soy inks
49
Ideal pH of dampening solution is
Answer
C. 5.5
50
Select Royal Indian Paper size.
Answer
D. 20″ × 25″
51
Which of the following is not essential for ink drying ?
Answer
B. Viscosity
52
Weight of 1000 sheets of paper of standard sheet size is known as
Answer
B. m. Weight
53
The pigments are derived from living organisms is known as
Answer
A. Organic pigments
54
Which of the following is the most common way of generating copy for printing ?
Answer
A. Computer
55
The earliest form of a book was created by the Sumerians on
Answer
A. Clay tablets
56
Which type of printing is based on the principle “Oil and Water does not mix
together” ?
Answer
D. Planography
57
Which of the following statements about anilox rolls is not true ?
Answer
D. The number of Cells Per square inch
58
Below are listed some type of blankets :
i. Hard blanket – 80°A to 85°A hardness
ii. Soft blanket – 40°A to 45°A hardness
iii. medium blanket – 65°A to 70°A hardness
iv. Sandwich blanket – 70°A to 80°A hardness
Which of the above answers are correct ?
Answer
C. i, iii, iv
59
dandy rollers is associated with
Answer
B. Fordrinier machine
60
__________ are solvents added to screen ink to alter viscosity and slow drying
time.
Answer
A. Retarders
61
A unique mechanism for bringing a new roll of paper into the feed cycle without
stopping the press is called
Answer
C. Flying splicer
62
The image area of the plate will not accept ink is called
Answer
B. Blinding
63
A chain delivery system uses this device to draw paper from the press and release
it to the delivery pile
Answer
C. Grippers
64
How many sheets are in a ream of paper ?
Answer
C. 500
65
Example for non-impact printers are
i. Inkjet printing
ii. Thermography
iii. Sublimation printing
iv. Porous printing
Which of the above answers are correct ?
Answer
A. i, ii, iii
66
Squeegees blade is made of
Answer
C. Rubber
67
The process that impresses a translucent design in paper is
Answer
B. Water marking
68
Which of the following would be an acceptable pH value for a fountain solution ?
Answer
B. 4.5
69
Below are listed some statements. Select which one of the following is not correct ?
Answer
C. GIF is an example of vector image file type
70
Select the device used to control the speed of elevation of the pile table.
Answer
A. Pile height governor
71
Roller hardness is measured with a
Answer
D. Shore-durometer
72
Select the substances added to dampening solution to lower its surface tension.
Answer
A. Glycerin and glycol
73
Which one of the following is not correct ?
Offset printing is a planographic printing process in which
Answer
D. the ink is transferred from a sunken surface
74
Currency or bank notes are printed on specially tough
Answer
B. Rag based paper
75
Presses that print on both sides of paper at the same time are known as
Answer
B. Perfecting presses
76
Which of the following is a true statement about a common-impression cylinder ?
Answer
D. All of the above
77
What is the largest market for flexography ?
Answer
C. Corrugated boxes
78
Blanket-to-blanket web presses uses how many printing couple to print on both sides
of the web simultaneously ?
Answer
B. 2
79
Cotton is the pure form of
Answer
C. Cellulose
80
_________ is considered the inventor of modern gravure printing.
Answer
D. Karl Klietsch
81
_________ adhesive is used in perfect binding operations.
Answer
B. Hot-melt
82
Adding a thin strip of cotton or silk at top and bottom of the book block spine is called
Answer
D. Headbands
83
_________ is assembling the book cover by joining the cover parts.
Answer
B. Case making
84
_________ aids to visually check whether the gathered sections are in right order.
Answer
Question Cancelled
85
_________ refers to the fixing of a single leaf to the outside of the section.
Answer
D. Tipping-on
86
In _________ process, the folded sections are placed inside each other in the ‘V’ form.
Answer
A. Saddle stitching
87
_________ helps in attaching the book block to book cover.
Answer
C. End paper
88
_________ is used for case making.
Answer
A. mill Board
89
In _________ process, the back edge of all the folded signatures is cut off and the
sheets are bound with adhesives.
Answer
D. Perfect binding
90
_________ improves the opening properties of books.
Answer
A. Rounding and Backing
91
Which of the following is not a function of packaging ?
Answer
D. deformation
92
_________ corrugated board has 2 flutes and 3 liners.
Answer
C. double wall
93
match the following :
a. Straight Tuck End 1. Requires glue at bottom
b. Reverse Tuck End 2. Both closure panels folds in the same direction
c. Snap lock Bottom 3. Closure panels folds in the opposite direction
d. Automatic lock Bottom 4. Quick assembly
Answer
C. a – 2; b – 3; c – 4; d – 1
94
_________ is used for packaging fragile products.
Answer
D. Bubble wrap
95
Which of the following statements is/are true ?
i. Glass can be 100% recycled.
ii. metal can be moulded into variety of shapes.
iii. Poly Vinyl Chloride is used for packaging carbonated beverages.
Answer
D. i and ii only
96
Which section is obtained when a vertical plane intersects both halves of a double
right circular cone but does not pass through the apex of the cones ?
Answer
D. Hyperbola
97
The complimentary and supplementary angles of 38° are _________ and
_________ respectively.
Answer
D. 52°, 142°
98
match the following :
a. Resistor 1. Three layers
b. Capacitor 2. Rectifier
c. diode 3. Passive component
d. Transistor 4. Limits current flow
Answer
A. a – 4; b – 3; c – 2; d – 1
99
____________ gears are used for power transmission in shafts intersecting at right
angles.
Answer
C. Bevel
100
Which of the following statements are true ?
i. Bearings support axial and radial load of shafts.
ii. Ball bearings are not antifriction bearings.
iii. Bearings require lubrication.
Answer
C. i and iii only
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.