| Post Name | Planning Surveyor Gr II/ Overseer Gr III/ Draftsman Gr III-KSLB/ LSGD |
|---|---|
| Question Paper Code | 109/2021 |
| Category Code | 504/2019, 135/2021 |
| Date of Test | 21 November 2021 |
| Medium of Question | ENGLISH |
| Exam Type | OMR Examination |
| Total Questions | 100 |
1
The standard size of D1 drawing boards as per BIS (1444 –1977), in mm :
Answer
B. 1000 700 25
2
Bow compasses are used for drawing :
Answer
A. Small circles upto 25 mm dia.
3
What is the size of A1 Drawing Sheet in mm :
Answer
D. 594 841
4
In Engineering drawing, 2 : 1 is :
Answer
C. Enlarged Scale
5
It is the thin solid line used to indicate the feature with which a dimension, note or symbol is
associated :
Answer
C. Leader line
6
Hidden lines are drawn as :
Answer
A. Dashed narrow lines
7
How are pencils graded?
Answer
A. Hardness or Softness of the lead
8
What is the area of AO Drawing Sheet?
Answer
B. 1 m2
9
A –––––––––––– has opposite sides equal and angles not right angles.
Answer
B. Rhomboid
10
–––––––––––– is the part of a circle bounded by an arc and a chord.
Answer
A. Segment
11
Which is a derived unit?
Answer
D. Area
12
In a well conditioned triangle, no angle is greater than :
Answer
D. 120
13
The preliminary inspection of the area to be surveyed is called :
Answer
B. Reconnaissance Survey
14
The temperature variation is –––––––––––– error in surveying.
Answer
C. Cumulative error
15
The size of field book in cm is :
Answer
A. 20 12
16
If the whole circle bearing of a line is 180, its reduced bearing is :
Answer
Question Cancelled
17
The horizontal angle between true meridian and magnetic meridian is known as :
Answer
A. Magnetic declination
18
A fixed reference point of known elevation is :
Answer
B. Bench Mark
19
If L is in kilometres, the curvature correction is :
Answer
D. 78.4 L 2 mm
20
Scale plate of a Theodolite is known as :
Answer
A. Lower plate
21
Contour lines are lines drawn on a map connecting points of equal :
Answer
D. Elevation
22
Full form of GPS :
Answer
B. Global Positioning System
23
How long does it take a GPS satellite to orbit the earth?
Answer
C. 12 hours
24
How are GPS Satellites powered?
Answer
D. Solar power
25
Full form of EDM is :
Answer
B. Electronic Distance Measurement
26
Full form of CAD :
Answer
D. Computer Aided Design
A 5 109/2021
27
In the context of CAD, What does UCS means?
Answer
B. User Coordinate System
28
To fit all drawing object in the visible drawing area, What do you need to select?
Answer
A. Zoom extents
29
What is the keyboard shortcut to turn ON/OFF the ORTHO mode in Auto CAD?
Answer
C. F8
30
–––––––––––– are the instructions you provide to CAD software to achieve the end result.
Answer
D. Commands
31
Some CAD programs have a command line, this is where
Answer
C. Command
32
A –––––––––––– is a drawing file with pre configured used settings.
Answer
C. Template
33
–––––––––––– is a command, it makes multiple copies of selected objects in a rectangular or
circular pattern.
Answer
D. Array
34
Monk bond is related to :
Answer
D. Flemish garden wall bond in which each course contains one header to two
stretchers
109/2021 6 A
35
While using Rankine’s formula to find the minimum depth of foundation, if angle of repose of
the soil is 30, then depth of foundation in metre is?
P P
Answer
C. 0.11
36
Lower pitch of mansard truss varies from :
Answer
B. 60 to 70
37
The intermediate supports for the binders in a triple joist timber floor is :
Answer
D. Girders
38
Which flooring is known as composition flooring?
Answer
B. Magnesite
39
A type of pointing in which a projection is formed in shape of ‘V’ is :
Answer
C. Weathered pointing
40
The slump recommended for mass concrete work is :
Answer
A. 25 to 50 mm
41
The temporary vertical support to the walls, roofs, floors etc. when lower portion is to be
removed for the purpose of providing openings or rebuilding is :
Answer
B. Dead shore
42
The defect of the timber, in which the outer surface of the timber is under compression and
interior surface is under tension, is :
Answer
D. Case hardening
A 7 109/2021
43
The test which is conducted to find out the workability of stiff concrete misc having very low
workability is :
Answer
C. Vee-bee test
44
Which of the following statement is true in connection with ‘FRC’?
Answer
Question Cancelled
45
The attrition test is done to determine
Answer
C. To determine the rate of wear of stone
46
Grades of concrete for RCC shall not be less than :
Answer
C. M 20
47
The portion of a standard brick cut in such a way that an angle other than right angle is
formed in plan is called :
Answer
D. Squint brick
48
The name of the timber piece whose breadth and thickness exceed 50 mm but the length is
less than 200 mm is :
Answer
C. Scantling
49
The process by which lime is converted into hydrated lime by adding water into it is :
Answer
A. Slaking
50
Rapid hardening cement has high percentage of :
Answer
D. Lime
109/2021 8 A
51
The type of finish in which irregular type of sinking is done in the central portion of the
stone is :
Answer
B. Reticulated finish
52
Ordinary cement achieves about 70% of its final strength in :
Answer
C. 28 days
53
Which compound is responsible for the initial setting of portland cement?
Answer
A. Tri-calcium aluminate
54
Which of the following tiles having semi-circular corrugations in longitudinal directions?
Answer
A. Pot tiles
55
Storage occupancy building includes the category of :
Answer
B. Group ‘H’
56
The mean horizontal distance between the front and rear plot boundaries is :
Answer
A. Depth of plot
57
While specifying for earth work in foundation trenches, drains etc. the initial lift is taken as :
Answer
D. 1.50 m
58
Generally total volume of dry mortar for pointing in brick work for 10 m2 is :
Answer
A. 0.06 m3
59
If the age of the building is 10 to 20 years, then total depreciation is :
Answer
D. 7.50%
A 9 109/2021
60
The life span of iron work in roofing is :
Answer
A. 80 years
61
The out – turn of the mason in stone arch work is :
Answer
B. 0.40 m3
62
Clear cover in reinforcement for foundation slabs and beams is :
Answer
C. 50 mm
63
Scrap value of a building is :
Answer
A. 10% of its total cost of construction
64
For painting or varnishing of Venetian doors, one surface area should be multiplied by :
Answer
D. Three times one surface area for both sides
65
For the complete work of ornamental or large cornice, the payment is done :
Answer
A. Per m
66
The incidental expenses of miscellaneous character in an estimate is :
Answer
D. 3 to 5 % of estimated cost
67
Weight of one cubic feet portland cement is :
Answer
B. 41 kg
68
Covered area of the building depends on :
Answer
C. Size of the plot
69
When mezzanine floor is used for residential purposes, its floor area should not be less than?
Answer
C. 9.50 m2
70
Quantity of 20 mm coarse aggregate in a cement concrete mix 1 : 2 : 4 for 10 m3 is :
Answer
A. 9 m3
71
For plastering and pointing, no deduction is made for opening upto :
Answer
C. 0.50 m2
72
Weight of 12 mm diameter MS bar in kilogram for 10 m is :
Answer
A. 8.90 kg
73
For the supply of stiff paint, unit of measurement in MKS system is :
Answer
A. kg
74
Surface tension of a liquid is expressed in:
Answer
B. N/m
75
Find the quantity of cement required for 10 m3 of brick masonry in cement sand mortar of
proportion 1 : 3 is :
Answer
C. 22 bag
76
The period of Kharif season is in between :
Answer
D. 1st April to 30th September
77
The weight of the silt flowing in the canal is expressed in :
Answer
B. kg/second
78
Which of the following statement is true, in the case of ‘fern leaf catchment area’?
Answer
C. Time of concentration is more
79
When ‘groynes’ are pointed towards upstream side of the river, it is called?
Answer
B. Repelling groynes
80
The number of blades provided in a Kaplan turbine runner is :
Answer
C. 4 to 8 Nos.
81
Which of the following, works on the principle of water hammer?
Answer
D. Hydraulic ram
82
The discharge of minor distributaries are usually :
Answer
A. Less than 0.25 cumecs
83
The reason of forming the ‘viscosity’ of a liquid is :
Answer
C. Cohesion and interaction between particles of liquid
84
The intensity of pressure at any point in a fluid at rest is same in all directions. This
statement is associated with :
Answer
C. Pascal’s law
85
A dam which consists of number of piers, and dividing the space into a number of spans is :
Answer
D. Buttress dams
109/2021 12 A
86
A canal syphon is most suitable if....?
Answer
D. The ‘FSL’ of the canal is slightly above the bed level of the drainage and the canal
is of small size
87
Which of the following statement is true?
Answer
D. The main function of under sluices is to divert the silt in the river bed
88
‘Hyetograph’ represents :
Answer
Question Cancelled
89
Internal dimensions of a water tank is 5 m, 6 m, 7 m respectively. What is the capacity of
tank is litres?
Answer
D. 210000
90
The unit of work in CGS system is :
Answer
B. Erg
91
How many square pieces of side 40 mm can be cut from a rectangular sheet of size
55 cm 45 cm?
Answer
A. 143
92
What is the linear strain if a bar 150 cm long stretches out to 152 cm when a load of 6300 kg
is applied?
Answer
B. 0.0133
93
The sum of circumference and diameter of a circle is 116 cm. The radius of the circle is:
Answer
A. 14
94
A machine displaces a load of 150 kg through a distance of 0.4 m, when an effort of 20 kg acts
through a distance of 5 m. The percentage efficiency of the machine is :
Answer
D. 60
95
A vehicle starts from rest and attains a velocity of 50 km/hr in 20 sec. Its acceleration is
–––––––––––– m/s2.
Answer
A. 0.6944
96
The ratio of change in dimension to the original dimension is called :
Answer
C. Strain
97
A boy of mass 50 kg runs up a staircase of 45 steps each having 15 cm height in 9 sec. Then
the power in KW is :
Answer
B. 0.3678
98
A beam which is rigidly fixed at one end and free at the other end is called :
Answer
C. Cantilever beam
99
Area of a regular hexagon of side 8 cm is –––––––––––– cm2 :
Answer
B. 166.28
100
A load of 1 Tonne is lifted by an effort of 250 kg. Then the Mechanical Advantage is :
Answer
D. 4
————————
109/2021 14 A
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.