| Post Name | SENIOR DRILLER |
|---|---|
| Department | GROUND WATER |
| Question Paper Code | 098/2016 |
| Date of Test | 11 August 2016 |
| Medium of Question | ENGLISH |
| Exam Type | OMR Examination |
| Total Questions | 100 |
1
The level of management most involved in the function of planning and organising is :
Answer
A. Top
2
The function of management in which various duties are allotted to various persons is called :
Answer
B. Organising
3
‘The wages which fulfil the basic requirements of workers are called :
Answer
C. Living wages
4
In which system of wage payment, a fixed payment is made after a fixed period of time :
Answer
B. Time rate
5
At break even point :
Answer
D. total cost is equal to sales revenue
6
PERT stands for :
Answer
A. Programme Evaluation and Review Technique
|
7
ABC analysis:
Answer
D. all of the above
A 3
{P.T.0.]
8
Work study is done by means of :
Answer
Question Cancelled
9
The simplex method is the basic method for :
Answer
D. _ linear programming
10
Statistical Quality Control is based on :
Answer
Question Cancelled
11
The term associated with the activity time is known as :
Answer
Question Cancelled
12
Production cost refers to prime cost plus :
Answer
Question Cancelled
13
Military type organisation is known as :
Answer
A. line organisation
14
The name of wage incentive plan which guarantees minimum wage to a worker and bonus is
paid for the fixed percentage of time saved : :
Answer
A. Halsey plan
15
Ina network diagram :
Answer
C. an activity is represented by an arrow and an event by a circle
16
Acceptance sampling is used in :
Answer
Question Cancelled
17
Iron-carbon equilibrium diagram :
Answer
D. allof the above
18
The body centred cubic space lattice is found in:
Answer
D. tungsten
19
The orthogonal cutting system is also known as :
Answer
B. two dimensional cutting system
20
The commonly used value of point angle for a standard twist drill is :
Answer
C. 118°
21
Size of a lathe is specified by :
Answer
D. all the above
22
The cutting tool in a milling machine is held in position by :
Answer
A. arbor
23
Which one of the following is an example of plastic welding?
Answer
A. Forge welding
24
Which of the following operations can be performed by a drilling machine?
Answer
D. all the above
A 5 098/2016
[P.T.O.]
25
Which of the following material is used for making drills?
Answer
D. any one of the above
26
The property of moulding sand due to which the sand grains stick together :
Answer
A. cohesiveness
27
Hack saw blade is specified by its :
Answer
Question Cancelled
28
Inaplaner:
Answer
C. tool is stationery and work reciprocates
29
Ina plain milling machine ,the table can be moved :
Answer
D. all of the above
30
The Brinnel hardness number for mild steel lies in the range of :
Answer
C. 110 to 150
31
Which of the following tests is a destructive test?
Answer
B. tensile test
32
The property of a material to resist penetration by another material is called : |
Answer
C. hardness
33
Steady flow occurs when :
Answer
D. conditions do not change with time at any point
098/2016 6 A
34
The pressure in metres of oil(having specific gravity 0.85) equivalent to 85 metres of
water is:
Answer
A. 100m
35
Pressure in Pascal at a depth of 0.5m below the free surface of water will be :
Answer
B. 4905 Pa
36
Rain drops are spherical because of :
Answer
C. surface tension
37
Newtons law of viscosity states :
Answer
B. _ shear stress is directly proportional to velocity gradient
38
Manometer is used to measure :
Answer
C. pressure at a point in a fluid
39
The term v*/2g is known as :
Answer
A. velocity head
40
The coefficient of discharge
Answer
B. C,=C,/C,
41
Notch is a device used for measuring : .
Answer
B. _ rate of flow through small channels
42
Hydraulic gradient line represents the sum of :
Answer
D. pressure head and datum head
43
The specific speed (Nₛ) of a turbine is given by:
Answer
A. Nₛ = NP¹ᐟ²/H⁵ᐟ⁴
44
The discharge through a single acting reciprocating pump having speed N rpm is :
Answer
B. LAN/60
45
The force exerted by a jet of water on a stationery vertical plate in the direction of jet is
given by :
Answer
C. pAVv?
46
3/2 DCV stands for :
Answer
A. three port two position directional control valve
47
Kaplan turbine is a propeller turbine having vanes on rotor are :
Answer
B. adjustable
48
Hydraulic ram is a pump which works :
Answer
C. on the principle of water hammer
49
Youngs modulus of a material which gives 2 kN/mm? stress at 0.01 strain is :
Answer
C. 200 kN/mm?
50
Poisson's ratio is equal to:
Answer
B. lateral strain/linear strain
51
Factor of safety is :
Answer
A. _ the ratio of maximum stress and safe stress
52
Modulus of rigidity is the ratio of :
Answer
D. shear stress and shear strain
53
Coefficient of friction is equal to :
Answer
A. tan( of angle of friction)
54
If angle of friction is equal to 5°, angle of repose is :
Answer
B. 6°
55
The distance between the base and centre of gravity of a semi circular lamina having radius
‘ris:
Answer
C. 4r/3x
56
Moment of Inertia of a circular section having diameter D about its centroidal horizontal
axis is :
Answer
D. «D*/e4
A 9 098/2016
[P.T.O.]
57
The moment of inertia of a rectangular section having breath 2 cm and depth 1 cm, about its horizontal axis is:
Answer
A. 1/6 cm⁴
58
Efficiency of a riveted joint is :
Answer
C. strength of riveted joint/strength of un riveted plate
59
The strength of single fillet weld, having length of weld /, weld size s and permissible stress
ois:
Answer
D. 0.707 slo
60
Power transmitted by a shaft having speed N rpm and average torque T in Nm is given by :
Answer
A. 22 NT/60 watts
61
The maximum bending moment in a beam occurs at :
Answer
B. a point where shear force diagram changes its sign
62
The maximum bending moment in a simply supported beam having effective span L
subjected to central point load W is given by :
Answer
C. WL/4
63
The width of sunk key having shaft diameter d is given by :
Answer
D. a4
64
The diameters of driver and driven pulleys of a simple belt drive are 100 mm and 50 mm
respectively. If the speed of driver pulley 1000 rpm, the speed of driven pulley is :
Answer
D. 2000 rpm
098/2016 10 A
65
The power produced inside the cylinder of an IC Engine is :
Answer
A. Indicated horse power
66
Morse test is used to determine :
Answer
B. indicated power
67
The ratio of work available at the shaft to the energy supplied is known as :
Answer
C. brake thermal efficiency
68
The compression ratio for petrol engine varies from :
Answer
B. 6to1l0
69
For providing correct firing order in spark ignition engines
Answer
C. distributor is used
70
The torque given by an engine will be maximum when the engine
Answer
Question Cancelled
71
The clearance volume is provided in reciprocating compressors
Answer
A. to provide space for valves and also to ensure that the piston does not strike the
cylinder at the end of stroke
72
Volumetric efficiency of an air compressor |
Answer
B. decreases with the increase of compression ratio |
73
The body which absorbs all the radiations falling on it is called
Answer
D. _ black body
74
The ratio of total emissive power of a body to the total emissive power of a black body is
called
Answer
C. emissivity
75
One tonne refrigeration in SI unit is equal to
Answer
B. 3.5kW
76
The temperature of air recorded by an ordinary thermometer is known as
Answer
D. dry bulb temperature
77
Humidity ratio is also called
Answer
B. specific humidity
78
Which of the following is used as working fluid in vapour compression refrigeration system?.
Answer
D. all of the above
79
Heat transfer takes place by the process of
Answer
D. all of the above
80
LMTD stands for :
Answer
A. Logarithmic Mean Temperature Difference
81
Khasi ‘is one of the languages of the state of :
Answer
C. Meghalaya
82
‘Guru Shikhar’ is a highest peak in which of the following mountain ranges
Answer
A. Aravali range
83
The National Highway No . 1 A that links Srinagar to Jammu goes through
pass.
Answer
D. Banihal
84
Which of the following pairs is not correctly matched?
Answer
B. Laterite — Uttar Pradesh |
85
Which one of the following revolts was made famous by Benkim Chandra Chatterjee in his
novel ‘Anand Math’?
Answer
A. Sanyasi rebellion
86
The first split in the Indian National Congress took place at Surat in :
Answer
D. 1907 |
87
In the ‘Individual Satyagraha ‘Vinoba Bhave was chosen as the first Satyagrahi. Who was
the second? |
Answer
C. Pandit Jawaharlal Nehru
88
Brahmagiri hill is situated in which district of Kerala : |
|
Answer
B. Wayanad
89
Which is the shortest river in Kerala?
Answer
D. Manjeswaram river
90
The Thermal Power plant of Bokaro is located in :
Answer
A. Jharkhand
91
Who wrote the book ‘ Keralam Malayalikalude Mathrubhumi’?
Answer
C. E.M.S. Namboothiripad
92
‘Nirvritipanchakam’ was written by :
Answer
B. Sree Narayana Guru
93
Who became the editor of ‘ Yuktivadi’ magazine in 1928?
Answer
C. Sahodaran Ayyappan
94
Who led the Pattini Jatha (Hunger Strike) from Kannur to Madras?
Answer
D. A. K. Gopalan
95
The birth place of Blessed Kuriakose Elias Chavara is at :
Answer
B. Kainakary
96
Who was selected as the Best Actor in the 63'¢ National Film Award?
Answer
A. Amitabh Bachan
97
Civil Services Day was observed in India on:
Answer
C. April 21
98
Who became the first Indian woman gymnast to qualify for Olympics? |
Answer
A. Dipa Karmakar
99
Who Won the player of the series in the ICC World Twenty 20 held in 2016? |
Answer
B. Virat Kohli
100
Where was Defense Expo 2016, India’s biggest ever defense exhibition, held?
Answer
D. Goa
098/2016 14 A
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.