| Post Name | Tradesman (Carpentry)-Technical Education |
|---|---|
| Question Paper Code | 038/2022 |
| Category Code | 604/2019, 757/2021 |
| Date of Test | 9 April 2022 |
| Medium of Question | ENGLISH |
| Exam Type | OMR Examination |
| Total Questions | 100 |
1
—————— is a wood working trade of cutting, shaping and installation of building
materials.
Answer
C. Carpentry
2
Always attend the institute well dressed and good physical appearance is a discipline of :
Answer
D. General discipline
3
The systematic process of making home or work place neat and clean is :
Answer
B. House keeping
4
The ‘5s’ concept is Japanese methodology for work place organization, in that ‘seiketsu’
stands for :
Answer
D. STANDARDIZE
5
While carrying hand tools in work shop always keep the pointed ends :
Answer
A. Down
6
‘PPE’ denotes :
Answer
C. Personal Protective Equipment
7
In situations where it is not possible to introduce any effective engineering methods for
controlling hazards, the workman shall use appropriate types of :
Answer
D. PPE
8
In hazards of striking against objects for head protection ——––––––––– can be used.
Answer
B. Helmet
9
While working on a wood turning lathe, the job should be properly held between :
Answer
A. Centres
10
In respiratory categories of PPE’s those used for protection from harm due to inhalation of :
Answer
C. Contaminated air
11
—————— can be easily handled and put to any shape by cheaper cutting tools.
Answer
C. Timber
12
——––––––––– Trees are those which grow end wards by depositing each tree layer
internally :
Answer
A. Endogenous
13
The centre portion of the cylinder of wood is :
Answer
A. Pith
14
It is the fully developed wood which surrounds the pith :
Answer
B. Heart wood
15
In this wood the sap wood is pale yellowish and heart wood is golden brown :
Answer
A. Teak
16
The abnormal growths on the side of the tree caused by some injury or irritation of the trunk
is :
Answer
B. Burls
17
The disease in timber is caused due to lack of ventilation is :
Answer
B. Dry rot
18
The process of drying out the sap and moisture in the cell cavities and cell walls of the timber
is :
Answer
B. Seasoning of timber
19
In this conversion the boards are cut with their width in the direction of medullary rays :
Answer
C. Quarter sawing
20
This tree is used for making the poor man’s hut all over the country :
Answer
C. Bamboo
21
What is the accuracy of steel rule?
Answer
D. 0.5 mm
22
The shape of Carpenter’s pencil is :
Answer
A. Oval
23
In Zig-Zag rule consists of 10 pieces. Each piece is 10 cm long then what is the total length of
the rule?
Answer
B. 1 meter
24
The use of mitre square is setting and testing the angle 45°, state the other two degree can
set and test with mitre square :
Answer
D. 90°, 135°
25
The saw which can hold three various sizes of blades for various uses?
Answer
D. Nest of saw
26
Which one of the following plane is used for planing the wood quickly and truly?
Answer
C. Jack plane
27
How many grades of natural oil stone available?
Answer
C. Two grades
28
Slips stone used for —————— surface.
Answer
B. Curved surface
29
The toothing plane is used for :
Answer
A. To prepare rough gluing surface
30
The sharpening angle of cutting iron in plane :
Answer
B. 25° to 30°
31
Which one of the following hammer shows the property of magnetism which helps in taking
nails and screws easily?
Answer
C. Cross pein hammer
32
Which part of the chisel is fixed inside the ferrule?
Answer
D. Tang
33
The mallet should never be sued in a —————— Chisel?
Answer
A. Paring chisel
34
Which one of the given tool is used as abrasive tool?
Answer
D. Hand File
35
What is used for planning a job from end side without damaging the edges?
Answer
D. Shooting board
038/2022 6 A
36
What is the use of Table Scarf joint?
Answer
C. Increasing length
37
What is the importance of haunch mortise and tenon joint?
Answer
D. For prevent rail twisting
38
In which category the tongue and groove joint belongs to?
Answer
A. Widening joint
39
Name the joint used for making shelves :
Answer
C. Housing joint
40
How to calculate the thickness of socket in a bridle joint?
Answer
B. 1/3rd thickness of stock
41
Which type of joint is used for making boxes?
Answer
D. Lap rebate and secret joint
42
Which of the following is the strongest half lap joint?
Answer
C. Dovetail half lap joint
43
Which joint is used for making frames?
Answer
Question Cancelled
44
Give another name for bird mouth joint :
Answer
D. Rafter joint
A 7 038/2022
45
The simple joint used for making wood fence :
Answer
D. Lap joint
46
Which type of bridle joints are usually used in mirror frames?
Answer
B. Mitre bridle joint
47
Which of the following is a squared joint?
Answer
D. Both
48
Table scarf joints are used in :
Answer
D. Poles
49
Name the joint is mostly used for flooring, panelling, etc.,:
Answer
B. Tongue and groove joint
50
Which joint is used to join the wood poles at an angle of 90° to one another?
Answer
D. Notched joint
51
The maximum tilting angle of the band saw machine is :
Answer
A. 45°
52
Name the part which can fix or slide on the lathe bed?
Answer
B. Tail stock
53
What is the use of jointer planes?
Answer
C. Planning to surface
54
How the work is feed for curve cutting in band saw machine?
Answer
D. Slowly and evenly
55
What is the advantage of ripping fence in band saw machine?
Answer
B. Accurate ripping and cross cutting
56
Which blade is used in a circular saw machine?
Answer
D. All of these
57
Small rectangular holes made with the help of :
Answer
Question Cancelled
58
The cutter in the tenoning machine is made of :
Answer
D. Tool steel
59
The shape of the crown guard fitted in circular saw machine is :
Answer
A. Semi circular
60
Fence is generally kept in surface planer at :
Answer
A. 90°
61
A thin sheet of wood obtained from log is called :
Answer
B. Veneer
62
Which is the minimum number of ply in plywood?
Answer
A. 3
63
How the particle board is manufactured?
Answer
A. Planer shaving, wood chips
64
Which glue is strong bond and water proof?
Answer
D. Blood albumen Glue
65
Face veneers thickness is :
Answer
C. 0.3mm to 1.6mm
66
What will happen while reheating animal glue?
Answer
A. Losses strength
67
What is the material used for making wire nail?
Answer
B. Mild steel
68
Which furniture is not used in library?
Answer
C. Centre table
69
What is the use of synthetic rubber adhesive?
Answer
D. Foot wear industries
70
A short flat head nail with a tapering point is :
Answer
C. Cut tack nail
71
What is the method of attractive items used in door frame and door shutters?
Answer
B. Carving
72
The forms of surface decoration produced by punching is called :
Answer
A. Matting
73
What is the wood selected for the ornamentation work?
Answer
D. Natural grain of figured timber
038/2022 10 A
74
Which tool is used inlay banding?
Answer
B. Scratch
75
What is the definition of ornamentation?
Answer
D. Decoration of wood article
76
Which is the composition of white lead and zinc mixed with linseed oil?
Answer
A. Paint
77
When is sand paper is used?
Answer
B. Final smoothing of surface
78
What is the colour of garner paper?
Answer
C. Reddish
79
Which is used for paint carrier?
Answer
C. Linseed oil
80
How many days are required for good quality of polish after preparation of mixtures?
Answer
A. 15 days
81
What is the recipe of good quality polish?
Answer
D. Shellac, gum mastic, gum sandaraz, gum benzoin and resin
82
The process of covering the screw head and nails are called :
Answer
B. Puttying
83
Which is used to remove old polish?
Answer
A. Benzine
84
What is the benefit of the stain?
Answer
D. New furniture match existing furniture
85
What is the movement for the polish second coat?
Answer
C. Circular motion
86
Which of the following statement is/are correct about the advantages of wooden pattern?
(i) It is easily affected by moisture
(ii) It can be shaped easily into different forms and designs.
(iii) When moisture dried out from the pattern it’s shape can be changed easily
(iv) The cost of workmanship is less than the other materials.
Answer
B. Only (ii) and (iv)
87
Which of the following statement is correct about multi-piece pattern?
(i) It is the simplest of all the pattern of casting that are in simple Design.
(ii) The patterns are mounted with one half on one side of the plate and the other half
directly opposite on the other Side of the plate.
(iii) It consists of wooden or metallic template having the shape corresponding to the
shape of the required casting.
(iv) It is used for casting of spindles, steam valve bodies, small pulleys etc.
Answer
D. (iv)
88
Which pattern used when a rapid production of small and accurate castings is desired on
mass production?
Answer
A. Match plate pattern
89
Which pattern is more useful when needed an easy withdrawal and without damaging the
mould cavity?
Answer
C. Loose piece pattern
90
Which statement is/are correct about skeleton pattern?
(i) A pattern consists of a wooden frame with strips
(ii) The patterns are generally used for soil and water pipes, Valve bodies and pipe
bends etc
(iii) A stickle piece is used to remove the surplus sand.
Answer
D. All of the above
91
The bottom portion of window frame is :
Answer
A. Sill
92
Which hinges are used most commonly for ledged and braced door?
Answer
C. Strap hinges
93
Which statement is/are correct about purlins in a roof?
(i) These are inclined wooden members.
(ii) These are horizontal wooden members.
(iii) These are used to support the principle rafter when the span is large.
(iv) These are used to support the common rafter when the span is large.
Answer
B. Only (ii) and (iv)
94
Which statement is/are correct about the bolt?
(i) It is generally used for joining large size members.
(ii) It is always used where a flexible joint is required
(iii) It is always used where the driving of nail is split the joint
(iv) It is used for joining the members carrying tensile stresses.
Answer
D. Only (i) and (iv)
A 13 038/2022
95
Choose the correct matching sequence of the following :
(1) Flush Doors
Answer
A. Classification on the basis of arrangement of
Components
(2) Battened and Ledged door
96
In a braced partition which member is used between the head and sill to make the frame
more rigid and strength?
Answer
B. Inter tie
97
Which statement is/are correct about a louvered window?
(i) It provide ventilation
(ii) It provide outside vision
(iii) Generally the angle of inclination of Louvres is 45
(iv) The slope of the Louvres are downward to the inner side
Answer
C. Only (i) and (iii)
98
Which door is used only in public places such as libraries, museums, bank etc?
Answer
A. Revolving door
99
Which stair can be used where the space is available for stair has a width more than twice
the width of a step?
Answer
D. Open newel stair
100
As per Indian standard about door frame, window frame, ventilator frame the depth of the
rebates holding the shutters shall be :
Answer
Question Cancelled
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.