| Post Name | TRADESMAN - CIVIL (Technical Education) |
|---|---|
| Question Paper Code | 006/2026 |
| Category Code | 276/2025 |
| Date of Test | 27 January 2026 |
| Medium of Question | ENGLISH |
| Exam Type | OMR Examination |
| Total Questions | 100 |
1
Which is the unit of measurement of honey comb brick wall?
Answer
B. m2
2
How many nominal size bricks are required for 1m3 brick masonry?
Answer
A. 500
3
Calculate the dry volume of concrete required for 100m2 of 2.5cm thick 1:2:4 DPC :
Answer
C. 3.85m3
4
The percentage added for contractors profit while preparing abstract estimate is :
Answer
B. 10%
5
Which is the accurate estimate prepared by working out quantities for each items of
work?
Answer
D. Detailed estimate
6
While taking quantity in a masonry work no deduction is taken for opening, bearing
etc... upto the area:
Answer
C. 1000 cm2
7
The multiplying factor applied in painting work for fully glazed door is :
Answer
B. 1 times one surface area for both sides
8
Which is the value of a structure at the end of utility period without being dismantled?
Answer
D. Salvage value
9
The annual periodic payment for repayment of the capital amount invested by a party is:
Answer
A. Annuity
10
The site plan shall be drawn to a scale of not less than:
Answer
C. 1:400
11
The carpet area of a habitable room shall not be less than :
Answer
B. 9.5 m2
12
Which type of building comes in Group H?
Answer
D. Storage Building
13
What is the standard size of B1 size Drawing board?
Answer
B. 1000 mm Γ 700 mm Γ 25 mm
14
Which of the following represent reducing scale?
Answer
B. 1:50
15
Choose the scale which shows only two consecutive units:
Answer
A. Plain scale
16
What is the description of E1 hidden outlines?
Answer
C. Dashed thick
17
A line of 5m is shown by 25mm on scale. Its representative fraction is :
1 1
Answer
D. 150 200
18
In aligned system of dimensioning, the dimensions are placed may read from :
Answer
C. From bottom or right
19
In orthographic projections, projectors from the object are ________ to the projection
plane:
Answer
D. Perpendicular
20
The eccentricity of an ellipse is :
Answer
A. Less than 1
21
The cooling of lava at the top surface of earth results into non-crystalline and glassy
texture. They are :
Answer
A. Trap and basalt
22
The process making clay is to brought proper degree of harness is known as :
Answer
C. Tempering
23
Which lime can be used for masonry work below ground level?
Answer
Question Cancelled
24
Which test carried out for finding out the presence of free lime in cement?
Answer
B. Soundness
25
The presence of moisture in sand increases the volume of sand. This property of sand is
called :
Answer
D. Bulking
26
Name the admixture for Cohesive concrete for underwater placements :
Answer
A. Anti-washout admixtures
27
Refractory clay mixed with stone and crushed pottery is then burnt at a high
temperature and cooled down slowly. As result is known as :
Answer
B. Stoneware
28
A concrete composed of cement, course aggregate and water only is called :
Answer
C. No-fines concrete
29
A defects by the access of fungi and indicated by white decayed spots in a healthy wood,
they are called :
Answer
A. Druxiness
30
Asbestos paint generally used for :
Answer
C. Acidic gases and steams places
31
An intimate mixture of two or more metals is known as :
Answer
D. Alloys
006/2026 6 A
32
A crake which separates fibres of wood and extends from one end to the other is known
as :
Answer
C. Split
33
The surface of wall not exposed to weather :
Answer
Question Cancelled
34
A right angled columnar projection from a wall or pier is termed as :
Answer
D. Pilaster
35
Which type of brick masonry bond is provided for heavy loads on masonry?
Answer
C. English bond
36
Every alternate header is centrally supported over a stretcher in
Answer
A. English bond
37
The scaffolding used for the construction of brick work is known as :
Answer
D. Putlog scaffolding
38
The process of strengthening the existing foundation :
Answer
C. Underpinning
39
Voussoir placed at crown of an arch is termed as :
Answer
B. Key
40
A temporary wooden support used in construction of brick intel :
Answer
B. Turning piece
41
A stair in which all steps are provided as winders :
Answer
Question Cancelled
42
Additional finish given to nosing of stair is termed as :
Answer
B. Scotia
43
Number of holdfasts in a single side of door :
Answer
C. 3
44
Diminishing style is related to :
Answer
B. Glazed door
45
A window which is projecting beyond the face of wall :
Answer
D. Bay window
46
A window which can be open like a door :
Answer
A. Casement window
47
A floor made by mixing marble chips with cement :
Answer
C. Terrazo floor
48
Single joist timber floor can be used for span upto :
Answer
B. 3.6 m
49
Number of vertical posts in a Queen post truss :
Answer
A. 2
50
The bedding block provided at the end of a truss :
Answer
D. Template
51
Mat foundation is also known as :
Answer
C. Raft foundation
52
Pile which resist the horizontal force is :
Answer
C. Batter pile
53
In irrigation, unit of duty is :
Answer
B. Hectares per cumec
54
In a hydro power system, an enlarged body of water just infront of intake :
Answer
D. Forebay
55
A structure constructed across a drain, to pass the canal water over the drain :
Answer
A. Aqueduct
56
An imaginary line joining the places having the same average annual rainfall :
Answer
C. Isohyet
57
A structure which is constructed from bank to river used to protect the river banks by
keeping flow away :
Answer
C. Groynes
58
The graphical representation of average rainfall and rainfall excess is :
Answer
A. Hyetograph
59
Minimum width of railway platform is :
Answer
D. 3.66 m
60
Height of centre of arm of a semaphore signal from ground is :
Answer
D. 7.5 m
61
The standard length of B G railway track in India is :
Answer
A. 12.80 m
62
As per IRC, for state highways, minimum formation width in plane country is :
Answer
A. 12 m
63
As per IRC, maximum width or a road vehicle is :
Answer
B. 2.44 m
64
A gradient which is less than minimum gradient or more than maximum gradient :
Answer
A. Exceptional gradient
65
Vertical cutting of river bed :
Answer
C. Scour
66
A continuous structure provided over a dry valley :
Answer
B. Viaduct
67
What is the technical term for the process of bring the vertical axis of theodolite
immediately over a mark or station point?
Answer
A. Centering
68
What is the limit of error in 20m chain as per IS?
Answer
B. Β± 5 mm
69
Which is the compass that has graduation marked as 0ΒΊ on North and South and 90ΒΊ on
East and West?
Answer
C. Surveyorβs compass
70
The designation of the scale 1/1000 is :
Answer
A. 1cm=10m
71
The horizontal angle between the true meridian and a line is called :
Answer
B. Azimuth
72
The art of determining the relative heights or elevations of points or objects on the earth
surface :
Answer
C. Levelling
73
The permissible closing error in a ordinary levelling is :
Answer
D. E=+/β 24 K
74
A_________ is indicated when several contours coincide, the horizontal equivalent being
zero.
Answer
A. Vertical cliff
75
The process of determining the location of the station points occupied by plane table :
Answer
A. Resection
76
What is name of the survey in which field work and plotting are done simultaneously in
the field?
Answer
D. Plane table survey
77
Where is data stored in Total Station?
Answer
C. Micro processor
78
What is meant by GPS?
Answer
B. Global Positioning System
79
Which is the common choice of co ordinate for specifying position?
Answer
B. Latitude, longitude and elevation
80
The operation of establishing intermediate points on a straight line between the
terminal points is known as :
Answer
D. Ranging
81
What are the two main working environments in Auto CAD?
Answer
B. Model space and Paper space
82
In AutoCAD, which layer property controls the visibility of objects?
Answer
C. On/Off
83
Which command is used to convert a 2D drawing into a 3D model in AutoCAD?
Answer
A. EXTRUDE
84
Which shortcut key is used to open the properties palette?
Answer
D. CTRL + 1
006/2026 12 A
85
What is the standard command used to set up a page for plotting?
Answer
C. PAGESETUP
86
Which command is used to resize objects in AutoCAD?
Answer
B. Scale
87
Which command is used to create multiple copies of objects in a structured pattern?
Answer
C. ARRAY
88
The βMoveβ, βCopyβ, βMirrorβ, and βRotateβ commands are found in which toolbar?
Answer
A. Modify toolbar
89
The unit of force in SI system is :
Answer
C. Newton
90
Mechanical Advantage of a machine is the ratio of :
Answer
D. Load lifted to the effort applied
91
Area of an ellipse whose axis are 20 cm and 14 cm :
Answer
A. 220 cm2
92
When a body of mass m attains a velocity from rest in time t, the kinetic energy of
translation is :
Answer
B. 0.5mv2
93
The unit of stress is :
Answer
A. N/mm2
94
2Ο radian = _______ degrees.
Answer
D. 360
95
The victualic joint is a type of :
Answer
B. Mechanical joint
96
The sanitation system in which a small portion of storm water is allowed to enter in the
sanitary sewage sewer and the remaining storm water is conveyed in open drain is
known as :
Answer
C. Partially separate system
97
Reflux valves are also known as :
Answer
C. Check valve
98
The trap provided in the last manhole of house drainage system :
Answer
A. Intercepting trap
99
The turbidity in water may be due to :
Answer
D. All the above
100
The detention period of septic tank is :
Answer
C. 24 to 48 hrs
Discussion
Ask a doubt or share a tip.
No comments yet β start the discussion.