| Post Name | TRAINING INSTRUCTOR-SCHEDULED CASTES DEVELOPMENT DEPARTMENT |
|---|---|
| Question Paper Code | 059/2019 |
| Date of Test | 14 November 2019 |
| Medium of Question | ENGLISH |
| Exam Type | OMR Examination |
| Total Questions | 100 |
1
A plane figure bounded by more than four equal straight lines and containing more than four equal angles is termed as
Answer
B. Regular polygon
2
Standard dimension of the A2 size drawing sheet in millimetres is
Answer
B. 420 × 594
3
Scale used in a drawing is 1:2. The actual length of a 10 mm line in the drawing is
Answer
C. 20 mm
4
In the first angle projection
Answer
A. Object is between the observer and the plane of projection
5
In CAD, the command used to enlarge or reduce the size of a drawing to the required ratio is
Answer
C. SCALE
6
FILLET command is used to
Answer
C. Both A and B
7
Area of any irregular figure of plotted map is obtained by
Answer
D. Planimeter
8
Are is the unit of area of a square of side
Answer
Question Cancelled
9
Volume of Earthwork can be calculated using
Answer
D. All of the above
10
In metric survey chain, number of links per metre is
Answer
B. 5
11
Instrument used to measure angles or drawing lines at the given angles is called as
Answer
Question Cancelled
12
Fractional parts of the smallest division of the main scale can be measured using
Answer
B. vernier scale
13
When 1 cm on a map represents 10 m on the ground, representative fraction of the scale is
Answer
C. 1/1000
14
Standard size of drawing sheets recommended by the Bureau of Indian Standards is
Answer
D. All of the above
15
The path described by a point moving in a plane at a fixed distance from a fixed point is a
Answer
B. circle
16
Geometric method of projection obtained on the plane of projection when the projectors are parallel to each other and perpendicular to the plane of projection is
Answer
Question Cancelled
17
The distance of the top view of a point A situated 20 mm below HP and 30 mm behind VP is
Answer
B. 30 mm above xy line
18
Dimensioning starting from a common feature and shown to the right and to the left of the common feature is called as
Answer
B. parallel dimensioning
19
The command used to lock the movement of cross hair of the pointing device to the nearest grid point is
Answer
A. snap
20
Modifying commands used in autocad are
Answer
D. All of the above
21
Command used to create a new object which has shape of the object selected that can be copied to any plane parallel to the old one is
Answer
A. offset
22
Command used to create multiple copies of an object or objects in a rectangular or circular pattern is
Answer
C. array
23
A circle of radius 7 m has a standard error of 0.02 m on the radius. The standard error of its area is
Answer
D. 0.88 m²
24
One hectare of an area is equivalent to
Answer
B. 10⁴ m²
25
A rectangular piece of property has sides measuring 300 m and 200 m. What is the area of the property in acres?
Answer
A. 14.82
26
Simpson's rule is used to determine the area when the no. of offsets are
Answer
B. odd
27
Area of any irregular figure of plotted map can be obtained accurately by
Answer
D. planimeter
28
The rule based on the assumption that the boundaries are curved lines and are considered as portions of parabola are is
Answer
C. Simpson's rule
29
A cutting formed in level ground has a formation width of 12 m with the sides sloping at 1 vertical to 3 horizontal. If the formation height is 3 m, then the cross sectional area is
Answer
B. 63 m²
30
The prismoidal formula for determining the volume is
Answer
D. h/6 (A₁ + 4Aₘ + A₂)
31
If the smallest division of a vernier is longer than the smallest division of its primary scale, the vernier is known as
Answer
A. Retrograde vernier
32
The curvature of earth is taken into account when the extent of survey is more than
Answer
C. 260 sq km
33
The difference between the most probable value of a quantity and its observed value is called
Answer
C. residual error
34
The errors which arise from inattention, inexperience, carelessness and poor judgment or confusion in the mind of an observer is termed as
Answer
B. mistakes
35
The error due to bad ranging is
Answer
B. cumulative positive
36
A triangle is said to be well-conditioned if none of its angles is less than
Answer
D. 30°
37
In surveyor's compass the Zero is marked at the ______ of the circular graduated ring
Answer
A. both north and south ends
38
The Fore bearings of the lines AB and BC are 60° 10′ and 120° 20′, and their corresponding Back bearings are 259° and 301° 50′ respectively, then the angle B is
Answer
A. 139°40′
39
Local attraction in a compass survey may exist due to
Answer
B. presence of magnetic materials
40
At the equator the amount of dip is
Answer
A. 0°
41
If 'n' is the number of sides, then the total sum of the exterior angle in a closed traverse is
Answer
C. (2n + 4) × 90
42
Magnetic meridian and true meridian are
Answer
Question Cancelled
43
The magnetic bearing of a line is 85°30′ and the magnetic declination at that place is 4°30′ East. True bearing will be
Answer
B. 90°
44
If the bearing of a line is N 34°30′W, then the back bearing of that line will be
Answer
B. S 34°30′ E
45
The method used to orient a plane table at A with reference to two accessible points A and B is
Answer
D. Two-point problem
46
The rays drawn to the points of known location from the unplotted station occupied by the plane table are called
Answer
B. Resectors
47
Which of the following is not a methodology for the solution of a three-point problem?
Answer
D. Kirchoff's method
48
A compound lens free from spherical aberration is called
Answer
Question Cancelled
49
The accuracy required in precise levelling is of the order of
Answer
A. √K mm
50
Closed contours with higher value inside represent a
Answer
B. Hill
51
Two contours of different elevations do not cross each other except in case of a
Answer
C. Overhanging cliff
52
The contour lines are perpendicular to the
Answer
D. Both (A) and (B)
53
The Horizontal distance between any two consecutive contours is called
Answer
C. Horizontal equivalent
54
In an area the contour lines are parallel and equidistant, then the area should be
Answer
D. Uniform slope
55
The square method of indirect contouring is commonly used in
Answer
B. nearly flat areas
56
In direct method of contouring the process of locating point lying on a contour is known as
Answer
C. Vertical control
57
In double-line river the contours are
Answer
B. Stopped at the edge of the river
58
A point of known elevation above the datum line is called
Answer
A. Benchmark
59
The capability of telescope to produce sharp images is known as its
Answer
D. Resolving power
60
The line joining the optical centre of the object glass and the centre of the eye piece is
Answer
B. Axis of telescope
61
In levelling any surface parallel to the mean spheroid of the earth is called
Answer
C. Level surface
62
The combined correction due to refraction and curvature is ______ times of curvature correction
Answer
D. 6/7
63
The Simpson's rule for determination of the area is used when the number of offsets are
Answer
A. Odd
64
Which method gives more accurate results in area calculation?
Answer
C. Simpson's rule
65
A person of height 1.65 m standing on a cliff of height 20 m above the water level on seashore can sight a ship at a distance of about
Answer
B. 18 km
66
The branch of surveying in which measurements of distances is done by computations, is known as
Answer
A. Tacheometry
67
Generally the multiple constant of most of the instruments in tacheometry is
Answer
A. 100
68
A voice communication system mounted on the total station is
Answer
A. Geotronics Unicom
69
In electromagnetic distance measurement the number of cycles completed by the wave in one second is called
Answer
B. Frequency
70
In electronic surveying instruments for the purpose of precise centering ______ is used
Answer
C. Optical plummet
71
The error occurring in Total station instrument such that the tilting axis is not perpendicular to the vertical axis is
Answer
B. Tilting axis error
72
In a total station the first part of the distance error is independent of the distance measured is called
Answer
B. Zero error
73
The algebraic sum of deflection angles in a closed traverse is
Answer
A. 360
74
Which method gives more accurate results in theodolite measurements?
Answer
B. repetition
75
Bowditch rule is applied to
Answer
C. A closed traverse for adjustments of closing error
76
In a total station if the instrument is not firmly tightened on the tripod head, the error introduced is known as
Answer
B. Slip
77
The area of land acquired for the road along its alignment is
Answer
D. Right of way
78
Range of camber to be provided on water-bound Macadam roads is
Answer
B. 3% to 2.5%
79
For a constant value of co-efficient of lateral friction, the value of super elevation increases with
Answer
A. increase in speed and decrease in radius of curve
80
Ruling gradient for roads in plain terrain is
Answer
C. 1 in 30
81
Beginning of the curve where the alignment changes from a tangent to a curve is
Answer
A. point of curve
82
A clothoid is another name of a
Answer
D. Spiral
83
A sprinkler irrigation system is suitable when (i) the land cannot be suitable for surface methods; (ii) Soil is excessively permeable or impermeable; (iii) Depth of soil is shallow over gravel or sand
Answer
C. All of the above
84
Which of the following is a major kharif crop in India?
Answer
B. Rice
85
The first watering before sowing the crop is
Answer
C. Paleo
86
Match correctly the measurement of duty taken at various points. List-I: (i) head of branch canal; (ii) outlet of a canal; (iii) head of main canal; (iv) head of the land to be irrigated. List-II: (p) Gross quantity; (q) Lateral quantity; (r) outlet factor; (s) Net quantity
Answer
D. (i)-q, (ii)-r, (iii)-p and (iv)-s
87
The extension of one or more courses of brick or stone from the face of wall which serves as a support for wall plate is
Answer
B. corbel
88
Foundation suitable for black cotton soil is
Answer
A. Under-ream pile
89
A window provided on the sloping roof is
Answer
B. Dormer window
90
A triangular space formed between the extrados and the horizontal line drawn through the crown of an arch is
Answer
A. Spandril
91
The roof truss to be used when a room is required to be provided in the roof is
Answer
D. Truncated roof truss
92
For plastering on walls: (i) For small openings upto 0.65 sqm, no deduction is made; (ii) For openings above 2 sqm, deduction is made for both faces of the opening
Answer
C. Both (i) and (ii) are false
93
If d is the vertical distance between centres of the upper and lower arms of the bent-up bar, then for a 45° cranked bar, the additional length to be provided for one bent-up is
Answer
Question Cancelled
94
The painting coefficient for panelled door is
Answer
C. 2 ¼
95
The effects of the excessive presence of the various ingredients in bricks are given. Match List-I with List-II. List-I: (p) Alumina; (q) Silica; (r) Lime; (s) Iron oxide; (t) Magnesia. List-II: (u) melts and loses its shape; (v) Shrink and warp during drying and burning; (w) Decay of bricks; (x) Destroys cohesion and makes bricks brittle; (y) Makes bricks dark blue
Answer
B. p-v, q-x, r-u, s-y, t-w
96
Soundness test of cement is performed with the help of
Answer
D. Le Chatelier Apparatus
97
A peculiar curved swelling found on the body of a tree is known as
Answer
B. Rindgalls
98
Carbon content in mild steel is
Answer
C. 0.10 to 0.25%
99
An example of a sedimentary rock is
Answer
D. limestone
100
Rapid hardening cement develops at the age of 3 days the same strength as that is expected of ordinary portland cement at
Answer
A. 7 days
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.