| Post Name | WORK SUPERINTENDENT - SOIL SURVEY AND SOIL CONSERVATION |
|---|---|
| Question Paper Code | 116/2023 |
| Category Code | 270/2022 |
| Date of Test | 13 July 2023 |
| Medium of Question | ENGLISH |
| Exam Type | OMR Examination |
| Total Questions | 100 |
1
What is the area of A0 size drawing sheet ?
Answer
B. 1.00 square metre
2
What is the use of french curves ?
Answer
B. To draw irregular curves
3
What is the description of G2 in lines of symmetry ?
Answer
A. Chain thin
4
Which is a small shaped instrument of the drafting machine ?
Answer
C. mini drafter
5
What is the height in mm for title of drawing ?
Answer
C. 6, 8
6
Which of the following is not a linear scale ?
Answer
C. Scale of chord
7
What is the line of intersection of the picture plane with ground plane ?
Answer
D. Ground line
8
What is the sum of the interior angle and the corresponding external angle of a
polygon ?
Answer
B. 180°
9
What is the standard line thickness of the border line ?
Answer
B. 0.60 mm
10
What is the point at which the conic cuts its axis ?
Answer
D. Vertex
11
How many metres equals one nautical mile ?
Answer
D. 1852 m
12
What is the length of one link in Engineers chain ?
Answer
C. 1 foot
13
What is the angle which the needle makes with horizontal ?
Answer
B. dip
14
What is the name of triangle formed by joining the three ground points in plane table
survey ?
Answer
C. Great triangle
15
Which test is done to make the horizontal axis perpendicular to vertical axis of a
theodolite ?
Answer
D. Spire test
16
Where two contours of different elevation cross each other ?
Answer
B. Overhanging cliff
17
Where 0° is marked in prismatic compassis ?
Answer
B. South
18
What is used to take inclined line of sights in plane table surveying ?
Answer
C. Telescopic alidade
19
What colour is used for symbol for road metalled ?
Answer
B. Burnt sienna
20
What is the fullform of UTm ?
Answer
B. Universal Transverse mercator
21
The permissible closing error for accurate levelling is expressed as
Answer
C. E ± 0.012√Km
22
What is the term used for rotating telescope in clockwise direction about its vertical
axis ?
Answer
B. Right swing
23
What is meant by the departure of a line ?
Answer
A. Projection onto the east-west meridian
24
What is the term used for line joining the optical centre of the object glass and the
centre of the eye piece ?
Answer
C. Axis of telescope
25
What is the basis of GPS ?
Answer
B. Trianulation
26
Which of the following is the choice of co-ordinate for specifying the position of a
point ?
Answer
D. latitude, longitude and elevation
27
The shortcut key for undo last action in AutoCAd
Answer
A. Ctrl+Z
28
What is dpi in printing ?
Answer
B. dots per inch
29
What factor mainly determines the quality of a monitor ?
Answer
C. Resolution
30
Which command controls the extents of the display of the grid ?
Answer
C. limits
31
Which command reinserts the last erased set of objects ?
Answer
A. OOPS
32
Which is the shortcut key for polar tracking ON/OFF ?
Answer
D. F10
33
Which of the following command is used to copy the properties from one object to
one or more objects ?
Answer
C. match properties
34
To study the mineral constituents grain size etc. is _______ test.
Answer
A. microscopic
35
The total height of a clamp kiln is about
Answer
D. 3 m to 4 m
36
l.S. code of clay terracing tiles
Answer
C. 2690 – 1964
37
l.S. code of psc
Answer
A. 455 – 1989
38
The purpose of this test is to assess the plasticity of lime
Answer
C. Plasticity test
39
ln a mortar, the binding material is
Answer
B. Cement
40
The sand particles which sand pass through 1.5875 mm is sieves are known as
Answer
D. Fine sand
41
Grass or air bubbles are introduced into the plastic-cement mortar mix to produce a
material with a cellular structure
Answer
A. Cellular concrete
42
Hot rolled deforming bars conforming to I.S. code
Answer
A. 1139
43
These piles are driven at an inclination to resist larger horizontal or inclined forces
Answer
D. Batter piles
44
minimum height 50 mm only three stones are to be used to make up the height of
one course, mortar joint is 16 mm
Answer
C. Coursed rubble (3rd sort)
45
It prevent the tendency of stone joint to pull apart. This joint is used instead of dowel
joint.
Answer
A. Cramped joint
46
__________ roof has four sloping sides with zero vertical roof lines.
Answer
B. Hip
47
This truss is in the form of a bow
Answer
C. latticed roof truss
48
Single joist timber floor is adopted for maximum span of
Answer
B. 3.6 m
49
Vertical members of brick layers scaffolding are called
Answer
D. Standards
50
For protecting the coping and parapets _________ should be provided at various
locations.
Answer
Question Cancelled
51
Garnet hinge used in
Answer
A. Batten, ledged and braced door
52
minimum slope of ramp
Answer
C. 1 in 10
53
This step has a curved rise and tread
Answer
C. Commode step
54
The timber of evergreen trees that are soft in nature
Answer
D. Soft wood
55
A projecting moulded stone having its under surface throated is called
Answer
A. drip stone
56
The geometrical point from where the curve of the arch is drawn
Answer
C. Centre
57
Front open space residential building should be provided with a front yard of minimum
width of ___________ m.
Answer
A. 3
58
The minimum width of a habitable room shall be _________ m.
Answer
Question Cancelled
59
NBC of India 1979 types of buildings Group – E
Answer
A. Business building
60
The total usable covered area of a building
Answer
C. Floor area
61
Horizontal circulation area it may be __________ of plinth area.
Answer
B. 10% to 15%
62
Estimation process helps in working out the ________ of construct.
Answer
D. Cost
63
A projecting moulded stone having its under surface throated is called
Answer
Question Cancelled
64
Construction work is allowed after receiving of
Answer
D. Technical sanction
65
Unit of payment in damp proof course of cement concrete
Answer
A. sq.m
66
Portable pipes or larger hoses may also be used in place or ditches
Answer
C. Basin flooding
67
When the water is available at a higher level, and it is supplied to lower level by the
mere action of gravity, then it is called
Answer
B. Flow irrigation
68
lt is the ratio of the mean supply discharge to the full capacity discharge
Answer
D. Capacity factor
69
masonry gravity dams are now-
Answer
A. days constructed of only _________ height.
70
A gravity dam may be either _________ plan.
Answer
D. Straight
71
The water thus accumulated in the form of an artificial lake is known as
Answer
B. Reservoir
72
A gravity dam is the one in which the external force such as
Answer
C. Waver pressure
73
A notch is usually made of _________ plate.
Answer
A. metallic
74
Canal over the drainage
Answer
C. Aqueduct
75
The use of water for raising the crops is known as
Answer
A. Irrigation
76
The structure, made to pass surplus flood water from reservoir to the downstream
of the dam is known as
Answer
B. Spill way
77
The solid obstruction constructed across the river to raise the water level in river is
known as
Answer
C. Weir
78
lt is passage for the flow of surplus water or waste in a weir or conduct
Answer
C. Spill way
79
It include the waste discharge from sink, bath and wash basin
Answer
B. Sullage
80
The flow of the water in the channel may be continuous for the whole year or
seasonal
Answer
D. Perennial irrigation
81
The dam made of earth is known as
Answer
A. Earthen dam
82
A ___________ is a horizontal member which lintel is placed across an to support
the position of the structure above it.
Answer
Question Cancelled
83
What is the minimum area of window with respect to floor area ?
Answer
A. 10% of floor area
84
Hydraulic turbines are the machines which convert water energy into
Answer
D. mechanical energy
85
Pelton wheel is a
Answer
A. Tangential flow turbine
86
Irrigation capacity of a unit of water is
Answer
D. duty
87
Trees grow length wise through their ends
Answer
B. Endogenous
88
Cement paint is added in
Answer
A. Water
89
1000 cubic feet = _________ litres.
Answer
A. 28317
90
difference between circumference and diameter of a circle is 60 cm. Find the radius
of the circle.
Answer
C. 14 cm
91
Unit of temperature in SI system
Answer
A. Kelvin
92
What is the height of a cylindrical tank of base area 154 Sq.cm and Volume
3080 Cub.mtr ?
Answer
D. 20 m
93
How many spherical balls of 2 cm radius can be made from a sphere of 24 cm
diameter ?
Answer
A. 216 balls
94
1 HP = __________ Kg.m/s.
Answer
C. 75
95
The ratio between the ultimate stress and the working stress is called
Answer
A. Factor of safety
96
Find the efficiency of a machine having velocity ratio 5, if a force of 250 kg is applied
to lift a weight of 1000 kg with the help of simple machine.
Answer
B. 80 %
97
Which of the following is not a unit of power ?
Answer
D. Nm
98
Which force act on rivet ?
Answer
B. Shear Force
99
A stone is thrown vertically upwards with a velocity of 30 m/s. Find the maximum height (g = 10 m/s²).
Answer
A. 45 m
100
The ratio of stress to strain within elastic limit is known as
Answer
A. modulus of Elasticity
Discussion
Ask a doubt or share a tip.
No comments yet — start the discussion.